Energy Monitoring Equipment Supplied In Montenegro

Our Peacock Oil Burners are designed to flare liquid hydrocarbons without liquid fallout or soot formation. These burners provide excellent service for well testing operations. When only oil is flared, a high-pressure air or gas source is required to provide additional mechanical atomization to ensure the mixture is a fine mist when it exits the burner nozzle which is designed to accept separate ...

AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open flare and designed as natural draft or ...

The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...

Our Titan Demountable Flares, also named demountable derricks, are derrick-supported flares with three, or four leg configurations and overall heights of up to 200 meters. Designed to accommodate several risers/tips on the same derrick structure. Each flare tip has its own set of pilots. The demountable system allows maintenance at grade on each flare tip while keeping the other flare systems in ...

The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly quicker than those of a standard thermocouple ...

To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. Steam Assisted ...

The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...