Energy Monitoring Equipment Supplied In Nigeria

Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...

Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...

Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...

The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...

Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...

Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process values e.g. as curves, as a circular chart display ...

Building on over 40 years of experience in designing permanently moored systems, Bluewater has developed a Tension Leg Platform (TLP) to support offshore wind turbines. The TLP foundation is lightweight and is not designed for tow-out stability with a wind turbine, but for the support of a wind turbine when installed at ...

Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...

The Integrated Flow Solutions 6012 Series Electric Heater Control Panels offer convenient, economical control of resistive loads. A broad list of configuration options allow the 6012 series control panel to fit most common electric heater control requirements. These pre-engineered, pre-wired panels require only sensor, load and power supply connections. The 6012 Series Heater Control Panel ...

A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...

Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...

Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...

Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...

One or two-channel barrier for the safe separation of 4...20 mA standard signal circuits. The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications: Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to non-Ex areas for connection of active, intrinsically safe circuits to the ...

Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum uptime and profitability, you can depend on the 275GL+ to get the job ...

The mobileFLEX portfolio is the latest advancement from GE to deliver lower-cost, lower-emission power to drill rigs, artificial lift enhanced oil recovery and oilfield equipment. An all-gas alternative to diesel units, mobileFLEX is an EPA mobile-certified solution that provides a cost advantage to energy producers and operational advantage to drilling contractors by utilising field gases. For ...

Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...

The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...

High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...

The Abriox OSPREY SP Multichannel Remote Pressure Monitor is a solar-powered remote monitoring unit that can be installed in pressure regulating stations, district governors and city gates to monitor gas pressure up to 1450psi. A total of 3 pressure channels are available [OSPREY-MCA add-on required] which enables multiple pressure monitoring for a complete overview of the network performance; ...