Pyranometers Equipment Supplied In Europe

Kipp and Zonen CMP3 sunshine pyranometer. A mounting bracket/base may be required. (e.g PyroBkt below). The CMP3 does not require ...

SKM221 levelling unit and SKM226 mounting bracket may be required (see image to the right). The SKS1110 does not require ...

This is a pole mount robust bracket pre-drilled for use with the Kipp and Zonen CMP3 and the SKS1110. The mounting bracket positions the centre of the CMP3 approximately 155mm from the mounting pole. A stainless steel U bracket with securing nuts is ...

Precise longterm measurements of the hemispherical radiation budget at earth surface provide fundamental insights to understand the changing climate system of the earth. KISTERS’ innovative WeatherSens MPS100 sensor provides precise and maintenance-free measurement of solar radiation by photoelectric technology. The compact sensor is designed without any moving parts and with embedded ...

The SPN1 Sunshine Pyranometer is a precision solar radiation measurement instrument with a ground glass dome, and is designed for long-term outdoor exposure. It is an affordable and effective alternative to shade-ring pyranometers, pyrheliometers and traditional sunshine ...

A quality and affordable instrument to measure the power from the sun accurately. Self-powered, no batteries required, requires no amplification, and is designed to emulate a PV panel. ...

The P/N 102725 Pyranometer is a thermopile-type sensor that meets WMO, ISO-9060. and the EPA's SRDT specifications. The pyranometer measures global (direct and diffuse) solar radiation. Its directional response, spectral selectivity, and built-in temperature compensation, assure accurate and reliable measurement under normal environmental conditions. The 102725 Pyranometer is an instrument for ...

Ecoprogetti’s sun simulator module tester represents a new generation of sun simulator thanks to the use of LED as light source. The use of LED, more than consent a supply of radiation in triple class A fully respecting IEC 60904-09 gives more benefits like: prompt feedback, high luminosity efficiency that brings a minimal power dissipation and possibility of obtaining impulses of ...

The SP-510 is an upward-looking thermopile pyranometer with an analog output of 0 to 114 mv. The sensor incorporates a blackbody thermopile detector and acrylic diffuser with a rugged, self-cleaning sensor housing design. Typical applications include shortwave radiation measurement in agricultural, ecological, and hydrological weather networks. Sensors are also used to optimize photovoltaic ...

The PV-3 data logger is used by installers, householders, renewable energy companies to check PV (photo voltaic) installations. It can record solar irradiation up to 1,500W/m2 (watts per square metre), DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy installation. The logger will record up to 300 days using the included PSU (power supply ...

The CS320 is a digital thermopile pyranometer that measures broad-spectrum short-wave radiation and communicates over the simple SDI-12 protocol to the data logger. This sensor design eliminates measurement error and programming errors that can adversely affect data quality. This pyranometer has been designed to improve the global solar radiation measurement significantly (even under cloudy ...

The ML-01 Si sensor is the link between the reference cell and broadband thermopile pyranometer. Compared to the reference sensors it has a proper cosine repose and it is relatively compact, but benefits from the same characteristics as a PV module (Response time, Spectral and temperature ...

The MS-40 is an ISO 9060:2018 Class C pyranometer which is based on the EKO’s universal sensor platform. It is the most cost effective irradiance sensor to measure Solar irradiance across the full Solar ...

The PVMet™ 150 offers a precise thermopile pyranometer for optimal performance alongside an adjustable Global or Plane-of-Array Irradiance Sensor, one or two Back-of-PV Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, and the option for an additional Irradiance Sensor. Simple to install on any solar project, the PVMet 150 connects to Modbus RTU Communication with an ...

The CMP6 pyranometer is intended for routine global solar radiation measurement research on a plane/level surface. Fully compliant with ISO 9060:2018 specification for a Spectrally Flat Class B, the CMP6 features a sixty-four thermocouple junction (series connected) sensing element. The sensing element is coated with a highly stable carbon based non-organic coating, which delivers excellent ...

The CMP21 is a high performance research grade pyranometer, and is fully compliant with all ISO 9060:2018 Spectrally Flat Class A performance criteria (highest possible ISO pyranometer performance category). The CMP21 pyranometer is designed for measuring the irradiance (radiant flux, Watt/m²) on a plane surface, which results from the direct solar radiation and from the diffuse radiation ...

The SMP11 smart pyranometer combines class leading sensor technology with industry standard digital and analogue amplified outputs. Based on the proven CMP 11 technology, the SMP11 adds Modbus® interface, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological stations easy. The SMP is ...

Sunmeter PRO is a digital photovoltaic pyranometer (or silicon irradiance sensor) for calculating photovoltaic plant performance with a high degree of precision and reliability. Its monocrystalline silicon cell is laminated with glass for photovoltaic modules and E.V.A. like a micro PV module. It has additional stabilization processes and tests to minimize measurement drift over time. The cost ...

Sunmeter PRO Sunspec is based on Sunmeter PRO, a digital photovoltaic pyranometer (or silicon irradiance sensor) for calculating photovoltaic performance with a high degree of precision and reliability. This SUNMETER also has a SUNSPEC prescribed Modbus mapping. Like the Sunmeter PRO, the PRO SUNSPEC has a cell laminated in glass that increases the durability and stability of measurements over ...

It has a simpler construction than the Class B, but uses the same high quality materials. As the Class C is equipped with the same electronics as the Class B, the signal has a high level of linearity and noise immunity. The signal is normalized in the 4 to 20mA range. This analog output mode of the signal (current loop) is characterized by a simple wiring (cable with 2 wires), and a high immunity ...