Relay Testing Equipment Supplied In Canada

The B-PRO 4000 relay provides bus and substation differential protection (low impedance) with CT saturation security, integrated breaker failure, overcurrent protection and SCADA control in a fully integrated protective relay solution. The B-PRO 4000 relay also provides control, automation, metering, monitoring, high capacity for DFR quality fault oscillography, dynamic swing recording and ...

The L-PRO 2100 provides comprehensive distance based line protection, DFR quality fault oscillography, standard ring bus capability, swing recording, event logging, SCADA control and metering in a fully integrated protective relay ...

The B-PRO 4000 Multi-Busbar relay provides protection for any bus bar configuration with 3 differential zones and a check zone. Its scalable architecture allows flexibility to use the most cost effective hardware combinations, based on the actual number of zones and number of current inputs in the bus system. For example, protection for 23 feeders plus one bus tie breaker can be provided using ...

Integrity® is a low-profile, linear LED light bar with multi-color technology that offers police and firefighters a warning light solution to stay safe on the road. Through the Federal Signal Solaris® LED reflector technology, the Integrity light bar is engineered to increase off-axis warning and maximize the LED light source to eliminate dark spots and increase visibility. Exclusive to ...

The model VTC1015R Rackmount Voltage Converter supplies either 12V, 24V, or 48 VDC from a 24V or 48VDC power source. All new Current Mode switching design offers increased power and reliability in a compact package. Extra input and output filtering reduce EMI to extremely low levels. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection ...

The Elaho Relay Panel Feedthrough (ERP-FT) is a flexible and affordable branch-fed power control solution suitable for a broad range of applications. With enclosures sized for up to 48 relays, the ERP-FT serves well as a stand-alone, venue-based solution. It provides switched power control for 120-347 V single-pole circuits and 120/208 V or 277/480 V double-pole circuits. Optional control cards ...

Bacharach’s GDA-400 controller is designed to provide simultaneous display and alarm functions for up to four fixed-system monitors with 4 to 20 mA inputs. Real-time data displayed on the LCD includes gas type and concentration, bar graphs and 30-minute trends. The GDA-400 is equipped with a fault and three adjustable alarm levels per channel. Relay outputs allow control of audible and ...

The PWS1000R Series of rackmount power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. 20/22.5A, 48V Out, 220VAC In, AC/DC Power ...

The PWS1000R Series of rackmount power supplies provides 12, 24 or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Circuit innovations reduce output ripple to levels previously available only from bulky and inefficient linear power supplies. Reliability features include an input fuse, thermal shutdown, current limiting and output short circuit protection with ...

The sensor is a magnetostrictive device consisting of a diaphragm, nickel tube, magnet, drive coil and pickup coil. When 40kHz energy is applied to the drive coil, it causes the diaphragm to vibrate at a frequency determined by the mechanical resonant system of the sensor. Electrical energy is transferred to the pickup coil when the diaphragm is free to move in gas. When the diaphragm motion is ...

The sensor is a magnetostrictive device consisting of a diaphragm, nickel tube, magnet, drive coil and pickup coil. When 40kHz energy is applied to the drive coil, it causes the diaphragm to vibrate at a frequency determined by the mechanical resonant system of the sensor. Electrical energy is transferred to the pickup coil when the diaphragm is free to move in gas. When the diaphragm motion is ...

The Emergency Lighting Circuit Transfer Relay (ELCTR) is a branch circuit emergency lighting transfer switch designed to transfer a single lighting circuit up to 20A from one power source to another during a power failure or other emergency situation. UL 1008 Listed for North American emergency lighting applications, the ELCTR’s rugged construction and fail-safe circuitry are essential ...

The SIL MicroStep system allows distributed control of up to 16 individual stepper motors. Control signals are sent via Ethernet to the system, which appears as a standard EPICS input/output controller (IOC). In addition to sending control signals to each motor, position and monitoring information may be sent back to the control system. ...

The Advanced Display kit enables users to access the Gascard NG using a simple keypad and easy-to-use ...

GreenBug Energy has developed the following Fixed Speed Control Panels for our grid tied Archimedes screw generator systems. Our Fixed Speed Induction Generator Controls Panels are designed for interconnection with the utility for either net metering or revenue producing applications such as Feed in Tariff ...

Single-zone pump relays control the operation of a single circulator or pump from a 24-volt signal. Relay includes secondary low-voltage terminals for boiler operation. Three-zone multi-pump relays control the operation of up to three pumps or circulators from dedicated 24-volt signals. Relay includes secondary low-voltage terminals for boiler operation and DHW priority ...

Triad space heating boilers are the ultimate ready-to-install packaged system featuring a perfectly matched powerful and efficient burner and boiler combination. All necessary boiler controls and secondary plumbing are in place and pre wired, and the vessels easily fit through a 30″ doorway, resulting in a very quick start-up. Firing rates for the Series 300 are available from 210,000 ...

The Series 900 is a complete UL listed package that is a ready-to-install system featuring a perfectly matched powerful and efficient burner and boiler combination. All necessary boiler controls and secondary plumbing are in place and pre wired, and the vessels easily fit through a 32″ doorway, resulting in a very quick start-up. Firing rates for the Series 900 are available from 600,000 ...

The NON-PROPRIETARY controllers of the JOV series have been designed to allow elevator groups to continue working during modernizations. They are designed using industrial programmable logic controllers. They can be used temporarily or permanently and they can interface with other controller ...

The NON-PROPRIETARY controllers of the JRD series were designed to control hydraulic residential elevators. They are designed using relay logic or industrial PLCs which makes repairs and maintenance ...