Solar Irradiance Monitoring Equipment Supplied In Europe

We offer world-class, inventive products for solar resource monitoring and assessment, solar forecasting, soiling analysis and cloud detection. The Fulcrum3D solar monitoring system is based around the DataVOLT high speed data logger platform and includes two pyranometers, temperature/humidity sensor, and GPS receiver all as standard ...

Multifunction instrument for testing and verifying single-phase PV installations. SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both of a single module and of module strings. Thanks to SOLAR I-V, the ...

Rugged and precise pyranometer sensor for the measurement of global radiation, the sum of both the direct and diffuse components of solar irradiance. A thermopile measures the temperature of a horizontal surface exposed to sunlight. Output voltage is linearly dependent on incident solar power. An adjustable levelling plate and a bull-eye enable simple installation of the sensor. The sensor meets ...

HT204 is a digital solar meter for measurements of solar irradiation up to 2000W/m2, which can be used as an inspection device, typically in photovoltaic ...

The CM4 High Temperature Pyranometer is a radiometer specially designed for measuring solar or artificial light irradiance under the most extreme temperature conditions. With an operating temperature range of -40 ºC to +150 ºC and measurement up to 4000 W/m² it is a unique product. All the radiometer components are specially selected for their ability to withstand these extremely ...

Litemeter Current Pro is an analog photovoltaic pyranometer (or irradiance sensor). It is equipped with a monocrystalline silicon cell for high efficiency, and temperature compensated output. Manufacturing and Calibrations are done following the IEC 61215, IEC 60904-2; 60904-4; 60904-10 regulations. This irradiance sensor is the laminated glass version of the Litemeter Current sensor. The cell is ...

The PV-3 data logger is used by installers, householders, renewable energy companies to check PV (photo voltaic) installations. It can record solar irradiation up to 1,500W/m2 (watts per square metre), DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy installation. The logger will record up to 300 days using the included PSU (power supply ...

The All-in Panel Sensor (APS) is an innovative clamp-on device designed to enhance photovoltaic (PV) panel monitoring by measuring string current, temperature, and tilt without disrupting panel connection. This device stands out for its ability to facilitate the agile, accurate, and cost-effective management of solar assets. It plays a critical role in fault diagnosis by correctly identifying and ...

The BigRef is designed as reference cell for measurement and adjustment of irradiance for sun simulators. The the very precise calibration allows an exact determination of sun simulator irradiance. The BigRef can also be used for the measurement of non-uniformity of light for sun simulators for PV modules. Specially the large area of the sensor element offers a large advantage to reference cell ...

The P/N 102725 Pyranometer is a thermopile-type sensor that meets WMO, ISO-9060. and the EPA's SRDT specifications. The pyranometer measures global (direct and diffuse) solar radiation. Its directional response, spectral selectivity, and built-in temperature compensation, assure accurate and reliable measurement under normal environmental conditions. The 102725 Pyranometer is an instrument for ...

The PV-3 data logger is used by installers, householders, renewable energy companies to check PV (photo voltaic) installations. It can record solar irradiation up to 1,500W/m2 (watts per square metre), DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy installation. The logger will record up to 300 days using the included PSU (power supply ...

The MS-40 is an ISO 9060:2018 Class C pyranometer which is based on the EKO’s universal sensor platform. It is the most cost effective irradiance sensor to measure Solar irradiance across the full Solar ...

Sunmeter PRO is a digital photovoltaic pyranometer (or silicon irradiance sensor) for calculating photovoltaic plant performance with a high degree of precision and reliability. Its monocrystalline silicon cell is laminated with glass for photovoltaic modules and E.V.A. like a micro PV module. It has additional stabilization processes and tests to minimize measurement drift over time. The cost ...

Sunmeter PRO Sunspec is based on Sunmeter PRO, a digital photovoltaic pyranometer (or silicon irradiance sensor) for calculating photovoltaic performance with a high degree of precision and reliability. This SUNMETER also has a SUNSPEC prescribed Modbus mapping. Like the Sunmeter PRO, the PRO SUNSPEC has a cell laminated in glass that increases the durability and stability of measurements over ...

The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge ...

CloudCAM detects clouds, predicts cloud movement and provides cloud and solar irradiance forecasts 15 and more minutes in advance. Clouds have a substantial impact on the sunlight reaching the earth and changes in cloud shading can be very rapid. Predicting such changes can be vitally important for solar power generators. This affects many industries ranging from agriculture to solar power ...

The CMP3 pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The CMP3 pyranometer is designed for continuous indoor and outdoor use. The CMP3 pyranometer (ISO 9060:2018 ...

MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of ...

Our photovoltaic reference cells offer an economical but robust and reliable solution for measuring solar irradiance levels, particularly for monitoring photovoltaic systems. The design of these silicon solar irradiation sensors (Si sensors), which corresponds to that of a photovoltaic module, make these sensors ideally suited as a reference for monitoring photovoltaic systems. The spectral ...

A silicon irradiance sensor is a cost-effective, however rugged and reliable solution to measure solar irradiance and especially useful for monitoring of Photovoltaic (PV) ...