Fuel Cells Equipment Supplied In USA

Largest product variety. Extended performance range. Powerful and efficient. Yes to more choice with over 180 DC power supplies and electronic loads: programmable, bidirectional, regenerative. Yes to extended power ranges: From 600 W up to 30 kW programmable output power, from 6 A up to 1000 A output current, and from 10 V up to 2000 V output voltage. Yes to energy recovery greater than 96 % ...

The DMFC 25W is a liquid fuel cell that operates as an on-board battery charger for a wide variety of Class III vehicles in the materials-handling industry. The DMFC 250 keeps the vehicle battery at a high state of charge, eliminating the need for battery swapping and rapid charging, thus increasing productive time. Refueling infrastructure takes little space and is inexpensive and safe because ...

The GenCell G5 long-duration UPS (uninterruptible power supply) provides a potentially unlimited source of 5kW of backup power for telecom, first responders and niche industrial markets. Designed to be extremely reliable, the GenCell solution has minimal moving parts, redundant internal systems and is highly resilient to extreme environmental conditions (temperature, humidity, ...

Formic Acid can be used as an environmentally friendly de-icing agent, a food safe preservative/antibacterial in animal feed and as a finishing agent for leather ...

Our Hydrogen PureCell® Model 400 Hydrogen emits zero greenhouse gases while serving as a highly efficient, eco-friendly energy solution. This model can generate up to 440 kW of clean electricity and up to 352 kW (1.2 MMBtu/ hr) of heat suitable for space heating, cooling and other ...

Infinity’s XSTORRA® Regenerative Fuel Cell System combines power generation and energy storage for remote locations. This system consists of one module housing a hydraulically actuated fold-out solar array and a second module containing a hydrogen generator, fuel cell, and hydrogen ...

The SKYRE's baseline PEM Cell Electrolyzer Test System is highly versatile, offering a 100 kW test stand capable of accommodating both AEM and alkaline water testing. This turn-key testing solution is meticulously designed to advance your electrolysis development objectives and can be customized according to specific needs. Integrating power conversion, fluid and gas controls, this system works ...

Renewable Energy Holdings, LLC has the technical expertise to design and install custom integrated off-grid energy solutions for various applications. From solar and wind power, battery banks and off-grid power inverters to hydrogen generators and fuel cells, REH's team of designers and engineers will work with you to develop the right renewable energy system for your ...

The GenCell A5 off-grid power solution provides the benefits of green fuel cell energy with an inexpensive and easily accessible liquid fuel – anhydrous ammonia. GenCell’s patented ammonia cracking device generates hydrogen-on-demand for use by its hydrogen fuel cell generators. A single 12-ton tank of ammonia provides enough fuel for a year of 24/7 operation. When installing the ...

Carbon powders find their use for various applications such as support for catalyst materials, microporous layer fabrication, electrically-conductive dispersant for ultra-low catalyst loading, conductive filler, etc. Fuel Cell Store team supplies the following carbon based powder materials: Carbon Black - Vulcan XC72 (bead form), Carbon Black - Vulcan XC 72R (fine powder form), Ketjenblack ...

Anode and Cathode Gas Diffusion Electrodes (GDE) for an electrochemical device consist of catalyst loaded onto a gas diffusion layer (GDL). The mostly commonly used catalysts include carbon supported Platinum and Platinum/Ruthenium for the best catalyst dispersion and utilization for PEM Fuel Cells. Electrodes for a fuel cell applications are generally hydrophobic to reduce flooding issue ...

To reduce the hazards of electrical charge build up that can occur especially during high pumping rates of low conductivity materials through filters, additives are added to the product. Emcee Electronics, Inc. offers the Model 1150 Staticon System (listed in ASTM D 2624) that has the capability to monitor and control conductivity of such products in a variable moving stream. The system can ...

Solar and wind power generation, as well as battery storage, are all part of today’s microgrids. Together with protective relays, communication networks and microgrid controllers they are complex power systems that need thorough testing and verification before their safe and reliable operation can be guaranteed in all operating conditions. Distribution grids are undergoing rapid ...

We have many years of experience in producing flow plates for both PEM and DMFC fuel cells. ...

The ability to prepare well dispersed, high surface area electrocatalysts containing platinum has significantly increased the viability of many electrochemical processes. This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures. Platinum on Carbon (Vulcan, Ketjenblack) is most commonly used for Polymer Electrolyte Fuel Cell ...

Dispersions (also called ionomers) are one of the critical components of fuel cell components. Catalyst layers require improved ionic conductivity for their optimal operation and hence, preparation of catalyst slurries with the correct dispersion materials will enable high performances. Dispersion (or ionomers) also act as binder agents such as securing the catalyst particles either on the ...

Steam reforming of hydrocarbons is conventionally used for feedstock production for methanol synthesis, hydrogen production, ammonia synthesis and Fisher-Tropsch synthesis. Syn-Gas or Hydrogen can be produced using the Steam Methane Reforming ...

PCI is developing an integrated fuel processor for liquid fuels for application in PEM and High Temperature PEM fuel cell systems. Building upon its ultra-compact fuel reformer and fuel reforming catalytic reactor technologies, PCI is optimizing its fuel reformer and fuel processor technologies for the size, weight and performance needed to enable liquid-fueled PEM fuel cell systems under ...

Platinum on Carbon; Pt/Vulcan XC-72; High Performance Anode and Cathode Fuel Cell ...

e1 has the technology and expertise to design and develop customized natural gas (NG & biogas) reforming products to produce fuel cell grade high-purity hydrogen. NG based hydrogen generators are an excellent choice for larger applications (> 500 kg/d) where NG is available at the site. Typically, NG hydrogen generators are favored when continuous hydrogen generation is required and the ...