Energy Storage Equipment Supplied In Oklahoma

26 equipment items found
  • Manufactured by FW Murphy
    based in USA

    The TTD product is a solid-state fault annunciator and shutdown control system designed to protect engines, compressors and their associated equipment. The TTD model will accept 48 sensor inputs from normally open and/or normally closed sensors. Each of the 48 inputs can be configured for “Shutdown” or “Alarm Only”. Any input can be locked out by one of the two Start-Run ...

  • based in USA

    This system is designed to allow fuel gas to a pilot, ignite the pilot with use of proprietary spark igniter, and monitor using one of following technologies: Thermocouple, flame scanner, flame ...

  • Manufactured by US Fleet Tracking
    based in USA

    4G GPS tracker, portable, extended battery powered, light weight, discreet, no installation required, covert tracking, Pelican™ Case. Take the PT-V4 to the next level and get the PT-V4 Pro. It’s the same PT-V4 including a Pelican™ Case with a 80lb-pull magnet for adhering to steel and an extended battery that increases operational time to 75 hours. GPS tracker technology has ...

  • Manufactured by Maccor, Inc
    based in USA

    The multifunction Series 4000 is a range of fully automated, computerized test systems that provide the highest level of specifications and features available in the industry. From the base system that provides the highest level of accuracy and time resolution, features can be added to allow the Series 4000 test system to perform virtually any type of test, with any type of products (i.e. battery ...

  • Manufactured by Rotork plc
    based in UNITED KINGDOM

    The gas-over-oil range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational ...

  • Manufactured by Rotork plc
    based in UNITED KINGDOM

    The IQT Battery Backup actuator provides valve fail-safe operation by utilising power from a battery source during AC supply mains failure. Under normal supply conditions the actuator operates from the site AC electrical supply. On loss of this supply the actuator automatically switches over to receive power from a 24 VDC supply allowing control of the valve to the pre-configured ...

  • Manufactured by Rotork plc
    based in UNITED KINGDOM

    Can be powered by 1-phase or direct current supplies. Part-turn drive action. Optional Local Controls with LCD Display (linear, part-turn, multi-turn) as well as Local Controls with LCD Display Plus Supercapacitor Reserve Power Pack (RPP) (linear and part-turn only) units ...

  • Manufactured by Rotork plc
    based in UNITED KINGDOM

    Can be powered by 1-phase or direct current supplies. Linear drive action. Optional Local Controls with LCD Display (linear, part-turn, multi-turn) as well as Local Controls with LCD Display Plus Supercapacitor Reserve Power Pack (RPP) (linear and part-turn only) units ...

  • Manufactured by Maccor, Inc
    based in USA

    The Series 8500s are high power fully automated test systems designed for testing and characterizing Electric Vehicle and Energy Storage batteries. The systems are designed with B2G technology, allowing the electrical energy produced during discharge to be recycled to the electrical grid. Applications include testing of EV, HEV, PHEV batteries of all chemistries; energy storage batteries; super ...

  • Manufactured by H2 Compressors
    based in USA

    The HySpenser-1 is a revolutionary solution designed to streamline and simplify the process of on-site hydrogen fueling. This innovative system seamlessly integrates a high-performance compressor and dispenser into a single, compact skid. This eliminates the need for complex infrastructure set-up, making the HySpenser-1 the ideal choice for businesses and fleets looking to adopt hydrogen ...

  • based in USA

    Carbon is the basic building block of all organic substances and is therefore the basis of all living things. Because carbon combines readily with oxygen, giving off heat as a by-product, it is also a vital energy source. Carbon is one of the most useful of all chemical elements and Asbury Carbons is the most experienced processor of carbon products for industry today. Amorphous carbons such as ...

  • Manufactured by Hero Flare LLC
    based in USA

    The Hero Flare Enclosed Vapor Combustors are an effective, efficient and economical alternative to achieving compliance with Guad-0 EPA regulations. As an industry flare/combustor leader Hero offers more Guad-0 EPA listed compliant combustors models than any other company Our combustors are designed to destruct VOCs (Volatile Organic Compounds) and other vapors produced from oil storage vessels. ...

  • Manufactured by US Fleet Tracking
    based in USA

    This GPS tracker device requires a service plan. GPS tracker technology has evolved yet again with the PT-V4’s better connectivity enhancing its portability. The US Fleet Tracking PT-V4 is a truly LIVE tracking device, updating every 10 seconds for up to 10 hours of movement on a single battery charge. With the PT-V4, you can watch live as the person carrying the PT-V4 walks or drives. ...

  • Manufactured by US Fleet Tracking
    based in USA

    The AT-V4+ is a reliable, low-cost high-volume 4G/LTE Cat-M1 solution delivering the unparalleled accuracy and dependability you’ve come to expect from US Fleet Tracking products! This device is perfect for under-dash covert installation in fleet environments, offering easy installation and all the awesome features you’ve come to love in the US Fleet system, including geofence ...

  • Distributed by Schier Company Inc.
    based in USA

    40 cubic foot Patterson Kelly, Twin Shell Solids Processor Dryer, 304 stainless steel construction, rated full vacuum internal, jacketed for 15 PSI at 200º F, 65 pound maximum material density, standard feed ports with covers, 10' discharge high speed liquid feed bar with drive, 5 HP variable speed shell drive, on stands with Stokes vacuum pump, shell & tube heat exchanger & receiver ...

  • Manufactured by Maccor, Inc
    based in USA

    The multifunction Model 4200 has all the power of Maccor’s Series 4000 floor standing cabinet conveniently packaged in a desktop cabinet. The Model 4200 is supplied as a complete turnkey system with Tester PC and software. Powered by Maccor’s standard test system software and utilizing the same technology found in Maccor’s high-precision Series 4000 Automated Test System, the ...

  • Manufactured by Dankoff Solar Pumps
    based in USA

    The Dankoff Solar SIP KITS are currently unavailable due to backordered component materials. The expected availability date is early April. If you have any more questions regarding our SIP KITS, please contact the Dankoff Solar Support Team at 1(505) 395-2491. Thank you for your ...

  • Manufactured by Witt Lining Systems
    based in USA

    Koroseal PVC has a long proven track record of superior performance and lining protection in a wide range of chemical applications. Its unique formulation provides high resistance to strong corrosives, alkalis and salts. With an upper operating temperature of 200OF, Koroseal is designed to handle the most aggressive applications. Koroseal is an excellent choice for process tanks and storage ...

  • Manufactured by Maccor, Inc
    based in USA

    The Series 5302 is the latest in a series of computerized cell formation systems from Maccor, designed primarily for use in the formation of Lithium Ion and Lithium Polymer secondary batteries. New advanced features provide a greater flexibility and range of use compared with previous designs. This additional capability is even achieved at a reduced cost. The features in this new design allow the ...

  • Manufactured by H2 Compressors
    based in USA

    H2 Compressors designs and manufactures high-performance hydrogen compressors that cater to a wide range of clean energy applications, including fueling stations and industrial processes. These compressors prioritize reliability and efficiency, which are critical for the successful integration of hydrogen technology into existing operations. As industries transition towards sustainable energy ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you