Ash Management Equipment Supplied In Europe
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-CR2 has been designed as a medium sized cremulator. Featuring a larger loading vessel and stronger motor, the i8-CR2 has been well received by new and existing customers alike. The i8-CR2 can be used with any of our pet crematoriums such as the i8-PC1, i8-PC2, i8-55A and i8-500. Its large loading vessel means it is versatile enough for most small to medium sized operations. Designed and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Severe water pollution cases, animal diseases, new virus strains and spread of infectious diseases are only few of the consequences of improper poultry waste treatment. Modern incineration is recognized as a most efficient solution for significant risk reduction in poultry waste ...
-
Manufactured by Igniss Energybased in POLAND
Material recovery is a source of income for an incinerator. The recovered materials are mostly in the ash of the combustion chamber, or in the flue gas. The evaporation temperature and the melting temperature of the component is defining if it stays in the ash or it will travel with the flue gas to the filters and the ash ...
-
Manufactured by TransVit Energy Incorporated (TVI)based in USA
Islands and Resorts and remote sites present difficult challenges in clean and safe waste disposal. The Batch Gasifier can be sized for ocean transport, flown into very remote sites, or trucked in ready to operate with very little assembly. The system can even remain on a truck bed for portable ...
-
Manufactured by ANDRITZ Energy & Environment GmbHbased in AUSTRIA
We provide all the power generation technologies and services you need, up to complete power ...
-
Manufactured by Facultatieve Technologiesbased in NETHERLANDS
Compact and quiet. High capacity. Fully automatic. Modem link for on-line maintenance analysis and fault-finding. Integrated ash cremulator (optional). Excellent environmental performance. Low maintenance, with easy access to components. Good price, high ...
-
based in USA
Our grates provide waste flow that ensures drying, ignition, combustion, energy release and complete burn-out before the bottom ash outlet. In a waste-to-energy plant, the grate is where waste is converted into energy – the heart of the system. The combustion grate plays a vital role. As such, grates are a significant focus area for us. Over the past 80 years we have supplied more than 500 ...
-
Manufactured by Biomasa Forestal SLbased in SPAIN
The wood pellets Biomasa Forcstal SL are produced from locally harvested timber. We arc supplied by Spanish local forestry administrations. The Spanish forestry, by law, arc protected under the FSC® certification program. Remaining bark cannot be even burned in drying drum heater because smoke can contain ash and have impact on wood pellet quality. The logs arc made into sawdust locally with ...
-
Manufactured by Ashwell Biomass & Heating Limitedbased in UNITED KINGDOM
Wood pellets are shavings and sawdust compressed at high pressure to give small pellets which are of a uniform nature. Due to the resulting dense material, they are highly calorific in nature and therefore need a more compact storage area compared to the same output of wood chips. Their uniformity produces consistency in boiler operation enabling automated systems similar to those offered by oil ...
-
Manufactured by Martin GmbH für Umwelt- und Energietechnikbased in GERMANY
For decades, the MARTIN discharger has proven to be a compact, reliable and cost-effective device. The hot, burnt-out bottom ash is transported from the grate end to the discharger's water bath where complete quenching occurs. The water consumption depends exclusively on the temperature of the bottom ash and its capacity to absorb water. Only sufficient water to quench the bottom ash is fed to ...
-
based in GERMANY
The CCG technology is based on a long-standing, proven process of coal gasification for the generation of an ultra-pure, high-energy synthesis gas. This is the base material for the manufacture of classical synthesis gas products, such as methanol and ammonia, and is used for the manufacture of fuels and a great number of chemical base materials, or can be used for electric power and heat ...
-
Manufactured by Martin GmbH für Umwelt- und Energietechnikbased in GERMANY
The limit values for emissions applicable to waste-to-energy plants are more stringent than those applying to any other type of industrial plant. Irrespective of this, the trend to further minimize pollutant emissions is continuing. At MARTIN GmbH, this led to the development of the SYNCOM process, which consists of the following ...
-
Manufactured by Maskinfabrikken REKA A/Sbased in DENMARK
HKRST 10N boiler burns almost any material: Grain, grain waste, shavings, wood chips, coal, straw, wood pellets etc. up to 30% moisture. The boiler is designed as a reversing chamber boiler with closed end, insulated with A-batts and covered with aluminum zinc / plastisol coated steel ...
-
Manufactured by Schenck Process UK Ltd.based in UNITED KINGDOM
To provide the most effective pneumatic conveying system for ash handling requires a range of pumps and pressure vessels for the Power and Heavy ...
-
Manufactured by BIC Groupbased in BELGIUM
Waste incineration in rotary kiln is considered to be Best Available Technology (BAT) for medical and hazardous waste treatment, because of continuous operation creating steady state conditions, ensuring complete combustion which leads to complete destruction of dioxins and furans. There are two types of rotary kilns, named after the sense of solids- compared to gas flow in the ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
A vibratory device used for assisting with the cleaning of precipitators (a large flue filter) used in power stations. The vibration helps to dislodge or loosen fly ash soot from the ...
-
Manufactured by WOIMA Corporationbased in FINLAND
Municipal Solid Waste (MSW) is available in abundance everywhere in the world. It offers several business opportunities in reuse, recycling and incineration for energy. Yet, it remains an under-utilized resource, especially in the emerging countries, which would benefit the most of a local energy source. Similarly, the solution reduces the quantity of waste placed in landfills and improves ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you