Gas Turbine Exhaust Equipment For Fossil Energy
-
Manufactured by CECO Environmentalbased in USA
Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where steam is ...
-
Manufactured by Isolated Systems Ltd (ISL)based in UNITED KINGDOM
“Isoflex Expansion Compensators”, (E.X.J.), are designed to provide: Protection of ductwork and other hardware from the effects of thermal expansion absorb expansion, vibration and when specified, installation misalignment. Minimise transmitted loads to the Turbine outlet flange and by their very construction, E.X.J.’s also offer excellent acoustic ...
-
Manufactured by Braden Groupbased in USA
Gas turbine and engine exhausts produce high levels of noise, rapid and extreme heat build-up and turbulent fuel flow. That's why you need a proven exhaust system that meets the most stringent of noise regulations while surviving under the stress of a harsh ...
-
Manufactured by Sep-Pro Systems, Inc.based in USA
Ammonia absorption refrigeration is time-tested technology that has come of age. Waste heat recovery can be combined with absorption chilling to reduce or eliminate the electric power bill of mechanical refrigeration. For instance, if a company has a power-generating gas turbine, the high temperature exhaust heat can be converted to refrigeration with an ammonia absorption refrigeration (AAR) ...
-
Manufactured by Mikropor, Inc.based in TURKEY
Our gas turbine filtration solutions include unique products such as mini pleated, depth loading, and pulse filters offering high efficiencies and lower pressure drops with higher surface areas. Energy consumption, one of the basic cost items, constitutes approximately 80% of total filtration costs. Because of this high rate, using an air filter with high energy efficiency provides cost-saving ...
-
Manufactured by Standardkessel Baumgarte GmbHbased in GERMANY
In many industrial production processes, the energy consumption ratio is continuously rising. No surprise then, that "efficiency boosting" is increasingly becoming the focus of production process design. The heat-recovery technologies developed by Standardkessel Baumgarte yield very many positive effects for the energy balance - and also for environmental protection. Since the heat produced ...
-
Manufactured by Bellows Systems Incbased in USA
Aftermarket Exhaust and inlet expansion joints for Solar Gas Turbines. At Bellows Systems, we manufacture gas turbine exhaust expansion joints able to withstand high-temperature exhaust gases generated at high flow velocity such as the one created inside a Gas Turbine Exhaust System. We currently carry Exhaust Expansion Joints for almost all models and variants of Solar Gas Turbines models ...
-
Manufactured by EnergyLink Internationalbased in CANADA
GT exhaust bypass stack systems with blanking plate designs, guillotines or with a fully actuated diverter damper provides varying designs of switching from combined to simple cycle, controlled ramp-up of the steam cycle, and gas turbine operation during steam turbine trip. Our advanced designs ensure reliable quality performance and the highest standard in deliverables for your ...
-
Manufactured by Braden Groupbased in USA
The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...
-
Manufactured by National Filter Media (NFM)based in USA
Midwesco Filter Resources/TDC Filter's pre-filter wraps and panels for gas turbine air inlet housings are made with 100% synthetic media and are UL900 class 2 rated. The pre-filter panels are a beverage board design and can be incinerated to reduce disposal costs. These pre-filter panels come in a variety of sizes and MERV ratings. The pre-filter wraps protect the high efficiency filter cartridge ...
-
Manufactured by Schock Manufacturingbased in USA
Schock can custom design Inlet ducting and plenums to meet your acoustic and inlet flow requirements. We can design using internal or external ...
-
Manufactured by Industrial Heat Transfer, Inc. (IHT)based in USA
IHT can provide turbine air preheating coils quickly and with the same superior durability and performance people have come to expect from IHT products. Air preheating coils prevent the formation of ice that can damage your ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
EFiCELL Pre-Filters are designed to ensure high capacity filtration when available space is limited or processed air flow is high. The Snap-On design allows operation in combination with EFiCELL or MAGNUM final filters.EFiCELL pre-filters have been developed specifically for demanding processes, adverse environmental conditions and extreme volume flows.EFiCELL pre-filters are the best solution in ...
-
Manufactured by Schock Manufacturingbased in USA
We will optimize your Inlet silencers to be effective and cost efficient. We primarily use 304 Stainless Steel materials so that corrosion does not become a ...
-
Manufactured by Lummus Technologybased in USA
Lummus Technology has designed and built fired heaters to meet refining and petrochemical industry needs, including refinery heaters, steam superheaters, heaters for delayed coking units and steam reformers, and our patented SRT® (Short Residence Time) pyrolysis heaters for ethylene production. Our heaters can be designed to operate under natural draft, forced draft, induced draft or balanced ...
-
Manufactured by Flame Spray SpAbased in ITALY
Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
Compact filters owe their name to their compact, space-saving construction. They provide maximum media area within minimum volume, offering an optimum combination of high filtration efficiency and low pressure drop. As a result, compact filters attain long service life even when used with high volume flow rates and high inlet particulate ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
Eagle Filters' TurboMaster EPA is a new era in static filtration replacing ineffective and high pressure drop pulse filters to absolute cleanliness securing static filtration system without changing any construction of the air intake ...
-
Manufactured by Rakhoh Industries Pvt. Ltd.based in INDIA
Waste Heat Recovery Boiler processes gas turbine and biogas gensets exhaust. It is customized in both smoke tube and water tube type construction with a compact design. It offers higher efficiency and fully automated ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. Our Peerless-Aarding brand Gas Turbine Diffusers and Plenum is specifically engineered to cope with strong gas turbine ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you