Gas Turbine Exhaust Equipment & Supplies In Ohio

Gas turbine and engine exhausts produce high levels of noise, rapid and extreme heat build-up and turbulent fuel flow. That's why you need a proven exhaust system that meets the most stringent of noise regulations while surviving under the stress of a harsh ...

Midwesco Filter Resources/TDC Filter's pre-filter wraps and panels for gas turbine air inlet housings are made with 100% synthetic media and are UL900 class 2 rated. The pre-filter panels are a beverage board design and can be incinerated to reduce disposal costs. These pre-filter panels come in a variety of sizes and MERV ratings. The pre-filter wraps protect the high efficiency filter cartridge ...

EFiCELL Pre-Filters are designed to ensure high capacity filtration when available space is limited or processed air flow is high. The Snap-On design allows operation in combination with EFiCELL or MAGNUM final filters.EFiCELL pre-filters have been developed specifically for demanding processes, adverse environmental conditions and extreme volume flows.EFiCELL pre-filters are the best solution in ...

The temperature of air entering in gas turbines used for power generation must be precisely controlled to optimize air conditions and meet performance ...

Designed for simplicity, durability, and efficiency, air to water heat exchangers (or water to air heat exchangers) work by using water from a supplied source to either absorb process heat from, or supply process heat to an air stream. Because of their increased efficiency and relatively low energy consumption, air to water heat exchangers are highly sought-after for a number of industrial ...

The Mobile Test Rig by Hengst Air Filtration provides a specialized solution for power plants to evaluate filter cartridges under real-world conditions. This facility simulates a complete Gas Turbine Air Inlet House, allowing for a direct comparison of current and prospective filter efficiencies. The rig is equipped with pulse cleaning capabilities and features a remote-controlled data logger to ...

The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...

Fog cooling system basically consists of fog nozzles installed on stainless steel arrays typically placed across the section of the gas turbine inlet air ducting before or after the air filter; high-pressure stainless steel head pumps supply water from 1000 to 3000 psi (70-200 bar); pre-filter unit at pump water inlet to block big particles (bigger than 1 micron) in water; distribution feed lines ...

HIFYBER-GT products are used for gas turbine air intake filters. Our innovative high efficiency nanofiber based filter media provide perfect pulse cleaning and lower prossure ...

The cheapest energy is energy that is only captured in existing systems to make it usable, instead of having to produce it afresh elsewhere. And the better the components you use to do this, the greater the savings in terms of resources and costs. APROVIS is a professional and high-performance company operating in the field of exhaust gas heat exchangers. For more than two decades, the company ...

The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...

Simple cycle gas turbine operation is a fast and reliable way to provide flexible power demand at short notice, and we provide a range of solutions that support effective cyclic operation and the changes in thermal load which are part of the frequent start and stop cycles. Each Peerless-Aarding brand Gas Turbine Single Cycle Exhaust System design is constructed for internal stud spacing, stud ...

Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet ...

Optimus optimizes the customers’ return on investment by studying critical operating parameters including space availability, operating temperatures, fuel consumption, system capacities and many other factors. Optimus unfired waste heat boilers recover valuable BTU’s from hot process gas or gas turbine exhaust. The boilers are designed and constructed to Section I of the ASME Code for ...

The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. Our Peerless-Aarding brand Gas Turbine Diffusers and Plenum is specifically engineered to cope with strong gas turbine ...

At Industrial Heat Transfer, Inc., we design and manufacture chilling coils for a vast array of turbine applications. Our turbine inlet chilling coils are built for longevity and performance. Choose IHT coils to keep your turbine inlet cooling system operating at maximum efficiency for years to ...

Eagle Filters' TurboMaster EPA is a new era in static filtration replacing ineffective and high pressure drop pulse filters to absolute cleanliness securing static filtration system without changing any construction of the air intake ...

Compact filters owe their name to their compact, space-saving construction. They provide maximum media area within minimum volume, offering an optimum combination of high filtration efficiency and low pressure drop. As a result, compact filters attain long service life even when used with high volume flow rates and high inlet particulate ...

The latest in the Guardian Electric family of flight control grips. This grip is the state of the art for fly by wire active control for today’s most advanced commercial aircraft. It is designed to eliminate the need of traditional control columns and allows designers to save space in the cockpit and create better comfort for pilots. It features leather wrapped comfort along with ergonmic ...

Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support system. The protective sheeting in our gas turbine insulation is ...