Gas Turbine Exhaust Equipment Supplied In Europe

HIFYBER-GT products are used for gas turbine air intake filters. Our innovative high efficiency nanofiber based filter media provide perfect pulse cleaning and lower prossure ...

The cheapest energy is energy that is only captured in existing systems to make it usable, instead of having to produce it afresh elsewhere. And the better the components you use to do this, the greater the savings in terms of resources and costs. APROVIS is a professional and high-performance company operating in the field of exhaust gas heat exchangers. For more than two decades, the company ...

The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...

Simple cycle gas turbine operation is a fast and reliable way to provide flexible power demand at short notice, and we provide a range of solutions that support effective cyclic operation and the changes in thermal load which are part of the frequent start and stop cycles. Each Peerless-Aarding brand Gas Turbine Single Cycle Exhaust System design is constructed for internal stud spacing, stud ...

Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet ...

Optimus optimizes the customers’ return on investment by studying critical operating parameters including space availability, operating temperatures, fuel consumption, system capacities and many other factors. Optimus unfired waste heat boilers recover valuable BTU’s from hot process gas or gas turbine exhaust. The boilers are designed and constructed to Section I of the ASME Code for ...

The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. Our Peerless-Aarding brand Gas Turbine Diffusers and Plenum is specifically engineered to cope with strong gas turbine ...

Eagle Filters' TurboMaster EPA is a new era in static filtration replacing ineffective and high pressure drop pulse filters to absolute cleanliness securing static filtration system without changing any construction of the air intake ...

Compact filters owe their name to their compact, space-saving construction. They provide maximum media area within minimum volume, offering an optimum combination of high filtration efficiency and low pressure drop. As a result, compact filters attain long service life even when used with high volume flow rates and high inlet particulate ...

Gasification and Pyrolysis are ways of producing calorific gases from carbonaceous materials by heating the feedstock materials in a controlled manner to prevent them from fully combusting. ...

Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support system. The protective sheeting in our gas turbine insulation is ...

“Isoflex Expansion Compensators”, (E.X.J.), are designed to provide: Protection of ductwork and other hardware from the effects of thermal expansion absorb expansion, vibration and when specified, installation misalignment. Minimise transmitted loads to the Turbine outlet flange and by their very construction, E.X.J.’s also offer excellent acoustic ...

To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine in rapid starting mode and allowing the heat recovery steam generator (HRSG) to gradually come online. ...

Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where steam is ...

Often there are multiple technologies required for combustion turbine projects. Dürr Universal recommends designing a fully integrated, custom system, rather than buying individual pieces of equipment from multiple manufacturers with varying materials. This integrated gas turbine solution includes various combinations of clean, safe and efficient combustion turbine technologies, which are ...

With over 4,500 units installed worldwide Braden’s Gas Turbine Air and Exhaust Gas Handling equipment forms integral parts of a power generation system. Our products enable and manage the “clean” airflow of the system allowing clean power to be generated worldwide. ...

Our gas turbine filtration solutions include unique products such as mini pleated, depth loading, and pulse filters offering high efficiencies and lower pressure drops with higher surface areas. Energy consumption, one of the basic cost items, constitutes approximately 80% of total filtration costs. Because of this high rate, using an air filter with high energy efficiency provides cost-saving ...

Gas turbine and engine exhausts produce high levels of noise, rapid and extreme heat build-up and turbulent fuel flow. That's why you need a proven exhaust system that meets the most stringent of noise regulations while surviving under the stress of a harsh ...

EFiCELL Pre-Filters are designed to ensure high capacity filtration when available space is limited or processed air flow is high. The Snap-On design allows operation in combination with EFiCELL or MAGNUM final filters.EFiCELL pre-filters have been developed specifically for demanding processes, adverse environmental conditions and extreme volume flows.EFiCELL pre-filters are the best solution in ...

The Mobile Test Rig by Hengst Air Filtration provides a specialized solution for power plants to evaluate filter cartridges under real-world conditions. This facility simulates a complete Gas Turbine Air Inlet House, allowing for a direct comparison of current and prospective filter efficiencies. The rig is equipped with pulse cleaning capabilities and features a remote-controlled data logger to ...