Gasification Systems Equipment & Supplies In Asia & Middle East

A finned tube heat exchanger is specifically designed to enhance the efficiency of heat transfer by increasing the surface area over which heat can be exchanged. This type of heat exchanger is commonly used in various applications including air conditioning, refrigeration systems, and industrial processes where heat recovery is crucial for energy ...

Based on infrared gas absorption analysis method, TVAS-5000 calorific value analyzer adopts intelligent digital processing technology to realize the analysis process of gas concentration value and calorific value in gas. It has the characteristics of high degree of automation, strong function, easy operation and digital ...

A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...

The Dual Fluidized Bed ( DFB ) Gasifier developed by Gussing Renewable GmbH (GRE) with the technology introduced by Vienna University of Technology, is considered as the most sophisticated process for the production of gas from renewable resources in the world and is state of the art. At the heart of the FICFB (Fast Internally Circulating Fluidized Bed) reactor are two interconnected fluidized ...

Biomass gasification means incomplete combustion of biomass resulting in production of combustible gases, including Carbon monoxide (CO), Hydrogen (H2), Methane (CH4), CmHn, this mixture is called pyrolysis gas that can be used to run internal combustion engines, and generate CHP. The production of pyrolysis gas called gasification, is partial combustion of biomass (such as rice husk, woodchips, ...

The LiPRO Biofuel regasification plant converts wood chips into a combustible synthesis gas through a thermochemical reaction in a multi-stage gasification process. The synthesis gas is in turn converted into thermal energy and mechanical energy in an internal combustion engine. The thermal energy becomes local heat, and the mechanical energy becomes electrical power in a generator. All in one ...

Our Syngas Analyzers and Gasification Analyzers high-stability infrared detector for the simultaneous measurement of CO, CO2, and CH4. These gases are suitable for challenging applications such as syngas and gasification atmospheres. In addition, analyzers may use a compensated thermal conductivity cell for H2. Electrochemical O2 sensors may also measure percent levels of oxygen in the sample ...

Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more useful engine ...

WNP-Reberca includes internal combustion engines, three-phase asynchronous generators, electronic power conversion controller, engine heat exchange systems (including exhaust gas water heat ...

The charcoal press machine is mainly used for pressing powder materials that are difficult to form. It is characterized by high molding pressure, the number of revolutions of the main engine is adjustable, and it equipped with a screw feeding device. Zhengzhou Fusmar Machinery is a professional BBQ charcoal machine ...

Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...

Cogeneration is a variation of distributed generation, but it is an often misused and misunderstood term. A common thought is that cogeneration means running a generator in parallel with the utility grid, or "co-generating". While this is often done, this is not the meaning of the term. Cogeneration is simply using one energy source to produce two separate forms of energy. Cogeneration is also ...

Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...

Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...

Introduced in 1976, INNIO's Jenbacher Type 2 gas engine offers high efficiency power with a robust design. The stationary engine concept provides excellent durability, while enhanced components and a proven control and monitoring model give the Type 2 engine outstanding reliability. ~1,250 engines delivered since 1976. J208 – efficient L8-cylinders power generation solution for small/mid ...

Hot water application. Engine type: Jenbacher J420. Thermal output: 550 kW. Dimensions: 400 x 80 x 110 cm. Weight: 1150 ...

The result of continuous enhancements and extensive experience, GE's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. Serving the 1.5 to 4.4 MW power range, the 1,500-rpm engine speed results in a high power density and low installation costs. In addition, the Type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and ...

Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...

Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to ...

CASE Entrained Flow Gasifiers are Fourth Generation Coal Gasifiers where the technology is a step ahead of Circulating Fluidized Bed Coal Gasifiers. These gasifiers are designed to gasify a wide range of coal qualities ranging from High Grade Bituminous to High Ash Lignite. The technology works on the ash fusion temperatures of coal. LOW ASH fusion temperature coals can be gasified through this ...