Fossil Energy Equipment & Supplies In Barbados

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

The HT15E power unit is driven by a 15HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S4TLP. Other hydraulic tools and equipment may also operate from this power ...

The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...

The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...

Test Procedure: Place the colored end down into the test tube. Add questionable liquid. As little as 0.1% DEF will turn the strip green and the same 0.1% water will give the same reaction. At 1% DEF the strip will begin to turn BLUE in a few ...

The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...

Portable Fuel Analysis for Government Departments, laboratories, pipelines, research and ...

One of our most popular models is our i8-55G. It is completely flexible and customisable making it one of our most versatile incinerators. The top-loading design means liquids are well retained within the system during combustion and its smaller size belies high efficiency and impressive burn rates. The i8-55G General Incinerator is one of the most popular models in our medium capacity range ...

They supply the highest differential pressures or pressure ratios in the AERZEN product portfolio – the oil flooded compressor series VMY. VMY compressors are the ideal solution for low molar weights, coolants, and generally for fluctuating operation conditions and gas ...

The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...

This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

- Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization - Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources - High supply reliability thanks to self-firing function - Robust, reliable and durable - Versatile design for use with different fuel types and as a multi-fuel firing unit ...

The Wager Inspection Light and Viewport are designed to be used in conjunction with one another so that one may observe any fuel line leaks between inner and outer casings of water tube boilers or may see any leaks at hand hole plates on steam headers. The Wager explosion-proof and dust proof Inspection Lights consist of an explosion resistant globe which is inserted into the outside boiler ...

The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

The i8-20G is perfect for small camps, individual businesses or communities where waste streams are low. It is one of the most affordable ways to introduce yourself to the world of Inciner8. The i8-20G is one of the smallest general incinerators in our range. The top-loading design means liquids are well contained within this system during combustion. The i8-20G General Incinerator is a simple, ...

The i8-200A is a high capacity animal incinerator which is suitable for disposing of large domestic animals, sheep, lambs and small cattle benefiting from a wide opening door and high hourly burn rates. The i8-200A is large enough to offer impressive burn rates and batch sizes, whilst still being small enough to fit in a 20ft container. It is a common waste disposal solution for farms, shooting ...

I8-M80 incinerator was specially designed for medical waste streams. This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. The front loading design provides excellent liquid retention. The i8-M80 is a medium capacity specialist "M" incinerator for medical waste disposal benefiting from cylindrical combustion chambers, integrated I.D. fan ...

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...