Fossil Energy Equipment & Supplies In Chile

5,132 equipment items found
  • Showcase
    based in USA

    The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

  • Showcase
    based in GERMANY

    The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

  • Premium
    based in USA

    RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of boilers! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing plants, as ...

  • Premium
    based in GERMANY

    The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

  • Premium
    based in GERMANY

    The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

  • Premium
    Manufactured by Dieselcraft
    based in USA

    Test Procedure: Place the colored end down into the test tube. Add questionable liquid. As little as 0.1% DEF will turn the strip green and the same 0.1% water will give the same reaction. At 1% DEF the strip will begin to turn BLUE in a few ...

  • Premium
    based in GERMANY

    The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    The second biggest model in our medical range is the i8-M700. The machine was designed to outperform any other incinerator within its class. This model gives you the size, performance and flexibility to to expand if and when your waste stream does. Proven in many demanding situations and climates, it is being used as the primary waste solution by large medical facilities, health clinics and ...

  • Premium
    based in GERMANY

    The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...

  • Premium
    Manufactured by Baolan EP Inc.
    based in CHINA

    This type adopts international advanced technology and high-quality cordierite catalyst carrier. Coating composite molecular sieve catalyst, to improve the activity and stability of the catalyst at high temperature. It can be widely used in 300-550°C working conditions, and can be customized according to different industry conditions. It is commonly used in various high-temperature flue gas ...

  • Premium
    Manufactured by Hydra-Tech Pumps
    based in USA

    This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

  • Premium
    based in USA

    The Wager Inspection Light and Viewport are designed to be used in conjunction with one another so that one may observe any fuel line leaks between inner and outer casings of water tube boilers or may see any leaks at hand hole plates on steam headers. The Wager explosion-proof and dust proof Inspection Lights consist of an explosion resistant globe which is inserted into the outside boiler ...

  • Premium
    Manufactured by Baolan EP Inc.
    based in CHINA

    Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

  • Premium
    based in USA

    The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    The i8-20G is perfect for small camps, individual businesses or communities where waste streams are low. It is one of the most affordable ways to introduce yourself to the world of Inciner8. The i8-20G is one of the smallest general incinerators in our range. The top-loading design means liquids are well contained within this system during combustion. The i8-20G General Incinerator is a simple, ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    I8-M80 incinerator was specially designed for medical waste streams. This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. The front loading design provides excellent liquid retention. The i8-M80 is a medium capacity specialist "M" incinerator for medical waste disposal benefiting from cylindrical combustion chambers, integrated I.D. fan ...

  • Premium
    based in CANADA

    The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

  • Premium
    based in GERMANY

    The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...

  • Premium
    Manufactured by Inciner8 Limited
    based in UNITED KINGDOM

    The I8-700G model is the established 'powerhouse' amongst our large-scale incinerators. The second biggest model in our general range it was designed to outperform any other incinerator within its class. This model can be customized with viewing windows, external cladding and automatic loading to provide an effective and sustainable waste disposal solution for many different types of ...

  • Premium
    based in GERMANY

    They supply the highest differential pressures or pressure ratios in the AERZEN product portfolio – the oil flooded compressor series VMY. VMY compressors are the ideal solution for low molar weights, coolants, and generally for fluctuating operation conditions and gas ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you