Fossil Energy Equipment & Supplies In Latin America

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

Based on infrared gas absorption analysis method, TVAS-5000 calorific value analyzer adopts intelligent digital processing technology to realize the analysis process of gas concentration value and calorific value in gas. It has the characteristics of high degree of automation, strong function, easy operation and digital ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

The company's self-developed low-temperature denitration catalyst adopts advanced production technology. The catalyst has very good denitration performance in the low temperature section (180-280 °C), it can process high concentration of nitrogen oxides, and the denitration efficiency is over 95%. Low-temperature denitration catalysts are widely used in coking plants, sintering machines, ...

The Continental Controls Corporation's VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, and ...

Our high performance 100 H.P. model features a John Deere turbocharged 4 cylinder diesel and pressure compensated hydraulic pump. It is designed to drive our larger submersible pumps or other hydraulic equipment requiring flows to 53 GPM and pressures to 2500 ...

The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power ...

A finned tube heat exchanger is specifically designed to enhance the efficiency of heat transfer by increasing the surface area over which heat can be exchanged. This type of heat exchanger is commonly used in various applications including air conditioning, refrigeration systems, and industrial processes where heat recovery is crucial for energy ...

The IMR 550P device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The gas is filtered by the 3 micron filter and then heated by the sampling hose. The unique ...

Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...

Portable Fuel Polishing: 12 volt DC, 30 minute duty cycle, On for 420 Gallons then off for 30 minutes, Two Stage Filtration, Removes water and solids, Includes Manual Fueling Nozzle and two 13 ft ...

Before the coarse filtered bio or sewage gas can be fed to the gas consumer it is normally passed through a ceramic fine fillter. Here the gas is passed through a ceramic or reclay unit with a pre-determined pore diameter. Fine particles < 150 – 210 μm and condensate vapour are effectively removed. This eliminates any possible damage to components further on in the gas processing ...

Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...

The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...

This compact and rugged diesel power unit features an extended run fuel tank, extra oil cooling and easy handling. Great for continuous duty applications powering our pumps or other hydraulic equipment using the variable speed throttle to control hydraulic ...

The Wager explosion-resistant and dust-proof Viewports consist of a PYREX plate glass mounted to an aluminum frame and attached to the outer boiler casing. These Viewports may be used alone or in conjunction with the Wager Boiler Inspection Light. The Boiler Inspection Light and the Viewport have both been approved for installation aboard USN and USCG vessels for Oil Drip Detection on ...

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

Our specialized media is used to detect microorganisms in diesel fuel specifically. This type of culture media is designed to monitor microbial contamination in fuel, which can result in sludge buildup, fuel degradation, and potential damage to storage tanks and engines. It is used in industries that require clean fuel systems, such as automotive, marine, and aviation, where microbial ...

If you need to count on your backup power supply, you better be testing your fuel and polishing it on a regular basis. Never assume the fuel is good to go and then find out in an emergency that the fuel has a problem. From 400 gallons per hour to over 1200 gallons per hour of portable fuel ...