Fossil Energy Equipment & Supplies In Iowa
-
ShowcaseManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
-
ShowcaseManufactured by Continental Controls Corporation (CCC)based in USA
The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Lapel RICF Charcoal Cartridge. Plastic Cased. Dimensions:. Diameter = 1.63” ± 0.01 (41.4mm ± 0.25mm). Height = 0.77” ± 0.02 (19.6mm ± ...
-
PremiumManufactured by CR Clean Air Group, LLCbased in USA
Packed Tower Gas Absorber: The Clean Air Group, LLC Packed Tower Gas Absorber utilizes a vertical counter-current design for highly efficient absorption of a variety of toxic gases. In addition to its extensive uses in air pollution control, the Packed Tower can serve as a gas/liquid contactor in a number of process applications. Efficiencies of 99.9% and greater are not unusual for many ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-75G General Incinerator is one of the most popular models in our medium capacity range due to its simple, effective use as a multi-purpose incinerator with suitability for disposing of general solid waste and medical waste. Using the same technology and design as the i8-55G, the i8-75G increases the capacity of the primary chamber capacity allowing for greater burn rates and the capability ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-700A has the second highest capacity in our range of animal incinerators and is suitable for disposing of horses, cattle and other large animals benefiting from a wide opening door and high hourly burn rates. The second biggest model in our agricultural range is the i8-700A. The machine was designed to out perform any other incinerator within its class. It is an ideal disposal solution for ...
-
PremiumManufactured by Hydra-Tech Pumpsbased in USA
This Sound Attenuated unit is designed to be used in residential areas and other locations where low sound levels are required. Powered by a Perkins diesel engine, the HT100 DVPQ can drive several of our pumps and other hydraulic equipment. ...
-
PremiumManufactured by United Industries Group, Inc. (UIG)based in USA
UIG’s EVERSTORE glass-fused-to-steel tanks are the optimal solution for anaerobic digester applications. Whether mesophilic, thermophilic, pasteurizing or enzymic hydrolysis processes, EVERSTORE and EVERSTORE Hybrid tanks are the industry leader in anaerobic digestion and biogas production for renewable energy ...
-
PremiumManufactured by Hydra-Tech Pumpsbased in USA
The Sound Attenuated power unit is designed to be used in residential areas and other locations where low sound levels are required. With an efficient Deutz diesel engine this unit meets today’s emission standards and demanding hydraulic power ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-500G has the third largest capacity in our range of general waste incinerators. Suitable for various waste streams such as wood, paper, cardboard and plastics. The i8-500 uses groundbreaking design and user features found on our much larger machines. The i8-500 took over two years to develop and was designed from the ground up to offer impressive burn rates and large batch sizes. The ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The gas dome or gas cover is used first and foremost as the basis for various attachments for digesters, i.e., foam traps, gas extraction units, safety devices, mixers, measurement units etc., and secondly as an access point into the digester. For both applications the gas dome should be adequately dimensioned in order to meet all requirements. ennox gas domes comprise of a base unit with a ...
-
PremiumManufactured by Dieselcraftbased in USA
Did gasoline end up in a diesel fuel tank by mistake? If you THINK there is gasoline in the fuel you need to KNOW for sure or risk engine damage. To be 100% sure of contamination with gasoline you must send a sample to our lab. We will send you the container and a postage paid package to return the sample to the lab by Priority Mail. Once the lab gets the sample the test is completed and results ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
It is suitable for disposing of horses, cattle and other large or bulky agricultural waste streams. This system benefits from a wide opening door and high hourly burn rates which makes it a preferred disposal solution for farms, shooting practices, slaughterhouses, abattoirs, veterinary practices or similar facilities with high quantities of agricultural waste. One of our newest designs is the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic ...
-
PremiumManufactured by Hydra-Tech Pumpsbased in USA
This compact and rugged diesel power unit features an extended run fuel tank, extra oil cooling and easy handling. Great for continuous duty applications powering our pumps or other hydraulic equipment using the variable speed throttle to control hydraulic ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The i8-20A is the smallest DEFRA Type approved agricultural incinerator in our range. The top-loading design means liquids are well contained within this system during combustion. The i8-20A is perfect for small farms, veterinary practices or other small businesses within the agricultural world. It is also one of the most affordable ways to introduce yourself to the world of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you