Fossil Energy Equipment Supplied In Asia & Middle East

Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

The company's self-developed low-temperature denitration catalyst adopts advanced production technology. The catalyst has very good denitration performance in the low temperature section (180-280 °C), it can process high concentration of nitrogen oxides, and the denitration efficiency is over 95%. Low-temperature denitration catalysts are widely used in coking plants, sintering machines, ...

Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...

Based on infrared gas absorption analysis method, TVAS-5000 calorific value analyzer adopts intelligent digital processing technology to realize the analysis process of gas concentration value and calorific value in gas. It has the characteristics of high degree of automation, strong function, easy operation and digital ...

I8-M20 model is an advanced small scale medical incinerator with tertiary air fan and increased insulation to improve performance and provide all-round suitability. I8-M20 model is an advanced small scale medical incinerator. The i8-M20 is the first in our line of specialist "M" incinerators that are optimised for medical waste disposal. The addition of a dedicated advanced control panel allows ...

The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...

Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...

The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...

The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...

Our i8-M40 is a simple and effective medical incinerator. It was deisgned for small clinics, dental practices or small medical facilities where waste streams are quite low. The top-loading design means liquids are well contained within this system during incineration. Featuring inbuilt afterburners, the i8-M40 ensures harmful emissions are eradicated with ease. The i8-M40 is a medium capacity ...

The Abriox OSPREY SP Multichannel Remote Pressure Monitor is a solar-powered remote monitoring unit that can be installed in pressure regulating stations, district governors and city gates to monitor gas pressure up to 1450psi. A total of 3 pressure channels are available [OSPREY-MCA add-on required] which enables multiple pressure monitoring for a complete overview of the network performance; ...

The i8-40A is a medium capacity animal incinerator from our range of 'DEFRA Approved' models and is suitable for disposing of birds, poultry and domestic animals with dual function as a pet cremation system. The i8-40A is a medium capacity animal incinerator from our range of 'DEFRA Approved' models and is suitable for disposing of birds, poultry and domestic animals with dual function as a pet ...

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production ...

I8-M80 incinerator was specially designed for medical waste streams. This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. The front loading design provides excellent liquid retention. The i8-M80 is a medium capacity specialist "M" incinerator for medical waste disposal benefiting from cylindrical combustion chambers, integrated I.D. fan ...

Our i8-40G builds upon the success of our i8-20G and is a simple and effective incinerator from our small range. It excels due to its suitability for various non-hazardous waste types such as wood, paper, cardboard and other uncontaminated materials. The i8-40G General Incinerator fits right in the middle of our standard range in terms of capacity and is a simple, effective multi-purpose ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...