Fossil Energy Equipment Supplied In Greece

They supply the highest differential pressures or pressure ratios in the AERZEN product portfolio – the oil flooded compressor series VMY. VMY compressors are the ideal solution for low molar weights, coolants, and generally for fluctuating operation conditions and gas ...

The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

These tanks offer sufficient volume to safely store or withdraw even large gas quantities. The digital integrated weighing scales allow to determine the filling weight with an accuracy of up to ±500 ...

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production ...

Approved microgrid controller from Siemens as a technical base for the juwi Hybrid IQ microgrid solution. A new technological partnership between Siemens and juwi supports the mining industry regarding their energy supply: The objective is the collaborative introduction and further development of a modern control system for microgrids that enables a smooth integration of electricity from ...

In cooperation with overseas companies, we can supply spare parts for any type of pump that is not currently on the market or the value of the original spare is very high. Our prices are extremely competitive compared to genuine spare parts which often have long delivery ...

1 ″ single-phase pump for transfusion of LPG from tank to bottles. Suitable for factories, hotels, bottling plants and in any case where the use and bottling of LPG is ...

H2PS-5 is a Combined Heat & Power (CHP) system. It has a capacity of 5 kW electric power, while in the combined heat and power (CHP) mode, it can also produce up to 7 kW thermal energy in the form of hot water. The system is multi-fuel fed, i.e. it can operate with either Natural Gas, Propane/LPG or Biogas, converting it to electrical power through an intermediate production of hydrogen ...

The future of energy is in storage; Power to Gas is the solution. Electricity can be stored: The increase in the generation of electricity from renewable sources has created new challenges for the energy system. The air and the sun are clean sources, but they are not continuous and cannot be scheduled. As a result, there are peak moments of electricity generation that are balanced with recourse ...

Geohellas offers custom solutions to those industries whose processes include steps of purification of gas effluents prior to the release to the Environment. Applications include: desulfurization of gases, fly ash purification, decomposition of NOx gases, industrial food air filters and many ...

TEMAK can offer safety valves for liquids, steam, or other gases, spring loaded or counter-weight, applied for pressure up to 700 bar and temperature up to 600 °C, according to DIN, ASME, ANSI or API526. Additionally TEMAK can offer, as an alternative, rapture disks, which can be used in most industries. Safety valves ar rapture disks applied, for example, at industrial saturated or ...

The solution for temporary or long term storage of liquids is the oil storage tanks. Available in different sizes, they can accommodate polluted or hazardous liquids. Manufactured from PVC, neoprene rubber or polyurethane they can be open top or closed with top covers. Excellent for usage of oil products are very easy to fill /handle even in adverse weather ...

A microgrid is a self-sustained system, consisting of interconnected distributed energy resources and loads under a common control scheme that can operate in an independent mode during grid failures. Energy resources may be renewables like solar and wind, diesel generators, gas turbines, battery storage, electric vehicles and/or demand/response. Microgrids may serve applications ...

The EN boiler is steel, flamed, pressure type and designed to operate with oil or gas. The boiler construction provides a large combustion chamber volume, efficient heat transfer and sophisticated flue gas turbines. The boiler is of high resistance, designed for operation with an oil or gas burner. The construction is robust and quality is ensured by control at all stages of construction. Nominal ...