Fossil Energy Equipment Supplied In USA

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

Texas Boom offers the Leeagra DOT 500 Diesel Fuel Trailer. This trailer is built to be safe because it’s strong. Offering 500 gallon storage and transport of class 3 combustible materials. With all the features highlighted below, the DOT 500 is in a class by itself to meet your fuel hauling ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

The HT74DJV features a John Deere 4 cylinder water cooled diesel with your choice of fixed displacement gear of pressure compensated piston hydraulic pumps. It is designed to drive our submersible pumps or other hydraulic equipment requiring flows to 40 GPM and pressures to 2500 ...

The HB-SC-50 liter Hydrogen Fuel Cartridge is designed to be used as a standard storage for our portable FID based instrument and to act as a back up hydrogen source at room temperature. This hydrogen storage system is based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ...

The HT150EV power unit is driven by a 150HP 460 V, 3Ø, TEFC electric motor for use where electric power is available. It is designed to drive several of our pumps or other hydraulic equipment and tools. Several control options are ...

The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...

W-5 Test Kit: Test For Water in the Diesel Fuel Will work for clear and with red dyed ...

Our specialized media is used to detect microorganisms in diesel fuel specifically. This type of culture media is designed to monitor microbial contamination in fuel, which can result in sludge buildup, fuel degradation, and potential damage to storage tanks and engines. It is used in industries that require clean fuel systems, such as automotive, marine, and aviation, where microbial ...

This small sound attenuated diesel unit is designed to be used in areas where lower sound levels are required. Hydraulic flow can be dialed in to match the tool being used. Perfect for driving hydraulic tools and our submersible ...

Test is designed as a field; PASS OR FAIL. Test detects water and suspended solid contaminants in diesel fuels. Very simple and immediate. If all 5 indicator marks are visible the test PASSES but if the indicator lines disappear then the fuel FAILS. Failed tests require Fuel ...

The fuel industry tells us that fuel can have up to 200 ppm of water BUT your engine manufacture will tell you after you have a problem that ZERO water is allowed. Our W-5 Test Kit: Test For Water in your Diesel Fuel. Will work for clear and with red dyed ...

This Sound Attenuated unit is designed to be used in residential areas and other locations where low sound levels are required. With a Tier 4 Yanmar diesel engine and large fuel tank, the HT50DQV can run continuously for long periods between ...

The Continental Controls Corporation's VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, and ...

Test Procedure: Place the colored end down into the test tube. Add questionable liquid. As little as 0.1% DEF will turn the strip green and the same 0.1% water will give the same reaction. At 1% DEF the strip will begin to turn BLUE in a few ...

The HT20DYS power unit is driven by a Yanmar Diesel engine and is designed to drive several of our pump models including the S3TDI, S4T, S3CSL, and S6P. A built-in fuel tank allows this unit to run up to 12 hours between refills. Other hydraulic tools and equipment may also operate from this power ...

This Honda powered ‘Ultra-Lite’ power pack is primarily designed to drive our 2″ ‘Mini-Sub’ submersible pump. It can also provide very portable, self-contained, hydraulic power to run other hydraulic tools and ...

The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

Continental Controls Corporation’s designed the FT50 pre-assembled with 2″ valves for hassle free installation. The FT50 is applicable with various engines and fuels such as natural gas and propane, etc. The fail safe rapid shutdown response stops gaseous fuel flowing through in less than 200 milliseconds. Its operation relies on a spring-loaded piston within the valve to be moved by the supply ...