Synthetic Fuel Equipment & Supplies In Australasia

From 2016 AIR TECHNIC co-operates with EXPANDER ENERGY INC due to the use of biomass gasification technology (system AIR TECHNIC) for the production of synthetic fuels – Biomass Gas to Liquids (BGTL). Expander Energy INC (www.expanderenergy.com) is a technology company providing innovative solutions for the environmental and economic production of Synthetic Fuels. Expander Energy fosters a ...

The transportation sector of 2050 will run on an energy mix unlike that of today. Operators are demanding increasing quantities of low-carbon energy sources and renewable fuels, and the sector is searching for next generation technologies to help reduce emissions and achieve climate targets. Carbon Engineering’s AIR TO FUELSTM process provides a highly scalable solution that can help ...

S.W.H. GROUP SE is your partner for realising projects involving the plasma gasification of organic matter to produce electricity and heat or the alternative production of liquid bio fuels. Thanks to the high temperatures achieved by the plasma torch technology, we can produce synthetic gas from organic matter in a clean manner. This is then processed as a raw material for producing energy or ...

We would like to introduce our low-temperature pyrolysis equipment - Pirotex which is designed for recycling and utilization of scrap tires, mechanical rubber goods, plastics, oil sludge and waste oils. Pirotex pyrolysis plant is a highly ecological product. It produces nearly no emissions. The equipment is automated to the maximum that allows reducing human labor to elementary operations such as ...

Nitrile Fuel Hose is widely used in Automotive & Industrial applications requiring chemical resistance. Recommended for transfer of aromatic or non aromatic hydrocarbon fluids. Typical applications include fuel and lubricant transfer, gas transmission lines, gasoline and petrochemical pipes. It has good general industrial properties, although aging is poor when submitted to light and ...

Ecotechnol has developed an economic process for capturing carbon dioxide from exhaust gases produced in the burning of a wide range of carbon based fuels including coal, oil, natural gas or biomass. The process can be retrofitted to existing combustion processes, including power stations, furnaces, boilers, incinerators etc, and does not require high concentrations of CO2 in the exhaust gas. The ...

Only gasification allows to convert solid biomass to reach high efficiency in combined heat and power generation in the decentralized sector. Due to this Seenova has developed an fluidized bed gasifier which was optimized and tested and ready for market ...

For heating at a high temperature level. Thermal oil plants are used in almost all manufacturing industries. The decision for a thermal oil plant is almost obvious for some processes, as thermal oil has many compelling properties. For example, the operation of the plant is possible up to a temperature of about 350 ° C almost without pressure and extremely efficient. As an expert in process ...

The diverse feedstocks in use today have made variations in gas composition and concentration commonplace, and technologies that protect downstream catalysts from poisoning are increasingly important. The HTZ-31 is TOPSOE™’s state-of-the-art high-density zinc oxide absorbent for feedstocks with high sulfur concentrations. It delivers unmatched sulfur removal and protection, even ...

Recent reductions in emissions from High Speed diesel engines have created a new need to cool the diesel fuel. The extremely high injection pressure provide many benefits, but one side effect is a large increase in the fuel temperature when the fuel is depressurized and sent back to the tank via the return line. This can create extremely hot return fuel that exceeds the limitations of the fuel ...

PLANT FOR THE PROCESSING – LIQUEFACTION – OF COAL INTO SYNTHETIC HYDROCARBON FUELS BY THE METHOD OF PLASMA-CHEMICAL REACTION. The innovative production method is low-cost, environmentally friendly and promising in terms of the deep processing of coal into liquid ...

The model F-1/F-2 Combination CFR engine is used to determine the octane quality of gasoline and fuel blending components. This unit is recognized and approved by ASTM D2699 and D2700. This unit is equipped with a heavy duty CFR-48D type crankcase, variable compression cylinder, carburetor with adjustable fuel to air ratio, and knock measurement ...

The Dual Fluidized Bed ( DFB ) Gasifier developed by Gussing Renewable GmbH (GRE) with the technology introduced by Vienna University of Technology, is considered as the most sophisticated process for the production of gas from renewable resources in the world and is state of the art. At the heart of the FICFB (Fast Internally Circulating Fluidized Bed) reactor are two interconnected fluidized ...

In situations where plant space is at a premium, customers may want to site their electrolysers outside. At other times customers may want to configure an electrolyser for a more turnkey operation. To satisfy those needs, we suggest containerization. MC electrolysers deliver the M Series platform in a containerized form for easy outdoor installations. The M Series PEM Technology makes for a ...

Combining plentiful domestic feedstocks with Accelergy’s synthetic fuel process offers a fuel that reduces dependence on imported oil and, in many cases, meets or exceeds the requirements for low carbon ...

Waste to Energy is the process of creating energy in the form of electricity, synthetic fuels or heat from the combustion, gasification or pyrolysis/thermal distillation of waste source. WTE is a form of energy recovery. WTE processes produce electricity or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic ...

Renewable energy is gaining importance - primarily generated from locally available biomass resources. The Methanation of Wood gas (MoW)-process generates a high-quality Bio-SNG (Synthetic Natural Gas from biomass) from wood and wook-like materials. An existing natural gas grid can be used for transport and ...

DGF’s innovative fuel production system better utilizes biomass feedstock over conventional biomass to liquids projects because of DGF’s use of waste CO2 to make additional fuel. Depending on feedstock carbon content, DGF produces up to 3.6 barrels of biogenic blending component per ton of biomass feedstock compared to most other competitors who achieve about 1.1>1.3 barrel per ton ...

The engine oil pumps from SCHERZINGER are designed to convey or circulate engine oil of any commercially available quality without foaming. Even fully synthetic fuel-economy oils can be conveyed with these pumps with a maximum degree of efficiency. Depending on the request, models can be designed as a built-in or add-on pump and driven by means of a gear wheel or a ...

Fischer-Tropsch fuels are synthetic copies of standard fuels, such as diesel, Jet A, Jet B and milspec JP-8. The Fischer-Tropsch process involves reforming syngas to create fuels out of hydrogens and carbons, as opposed to conventional fuels refined from existing hydrocarbons – Fischer-Tropsh synthetic fuels are put together, as opposed to taken apart. As a result, Fischer-Tropsch synthetic ...