Geothermal Product Applications In Europe
-
Premium
Machine condition monitoring for power generation
Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...
By AMETEK Spectro Scientific Distributor in Stockport, UNITED KINGDOM.
-
PVT Solar Panel for Renovations
Challenges for existing construction/renovation Your home is probably the most important place for you and your family. We are used to it being comfortably warm and we want to keep it that way. Before you switch from a gas boiler to another heating system, you want to be sure that the alternative offers at least as much ...
By Triple Solar BV based in Amsterdam, NETHERLANDS.
-
Energy from geothermal heat
Geothermal heat is an inexhaustible, constant form of energy coming from the Earth’s own molten core, and its temperature grows in direct proportion to the depth one drills below the earth’s ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Energy from biogas and natural gas for agriculture
You are a farmer and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or ...
By Wolf Power Systems GmbH based in Gorleben, GERMANY.
-
Energy from solar heat
Zuccato Energia ORC systems can be easily used to realize thermodynamic solar plants, in particular hybrid solar plants, thanks to their excellent performances when operating under partial load – i.e. when the thermal input is lower than nominal, a situation that happens often in this type of ...
By Zuccato Energia Srl based in Verona, ITALY.
-
Heat Exchangers for Energy and Environmental Technology
The responsible care for the environment and the availability of energy resources are increasingly taking centre stage. We are planning for this, and exceed your requirements in respect to heat exchange in the fields of energy and heating, and of power stations and environmental ...
By APL Apparatebau GmbH based in Hopfgarten, AUSTRIA.
-
Groundbreaking Direct Hydraulic Drive Technology for Renewable Energies
CUTTING EDGE TECHNOLOGY FOR SUSTAINABLE ENERGY PRODUCTION. Renewable energy is collected from resources that are naturally replenishing but flow-limited, including carbon neutral sources like sunlight, wind, rain, tides, waves and geothermal heat. In order to meet increasing worldwide demand for energy, it is necessary to harness energy from renewable sources in order to provide ecologically and economically sustainable and efficient methods of power generation. From production machinery for solar panels to the ...
By Hägglunds Office in Älvsjö, SWEDEN.
-
Flow & energy management solutions for power & thermal plant sector
Spire Metering is a great fit for Power Plant, Thermal Energy Production ...
By Spire Metering Technology, LLC. Distributor in Eastwood, UNITED KINGDOM.
-
Flow measurement instrumentation for geothermal flow solutions
The "dirty" steam produced from geothermal ground steam has always been a difficult measurement. Our unique mass vortex meters are designed for this tough application allowing steam readings in pipes up to 72" ...
By Sierra Instruments, Inc. Office in Malvern, UNITED KINGDOM.
-
Fiber-Optic Solutions for Geothermal Monitoring Application
The surest way to detect the precise temperature profile along boreholes and wells for geothermal applications. Smartec dts offers unparalleled resolution performance and can be used to optimize production and maximize geothermal thermal ...
By Smartec SA based in Manno, SWITZERLAND.
-
Organic Rankine Cycle Systems (ORC) for Power Plants
When generating electricity using diesel generators and gas turbines, up to 70% of energy is converted into waste heat, escaping through the exhaust gases or cooling system. By instead connecting the waste heat to Againity’s ORC system, the heat energy is converted into valuable electricity. The image below shows Againitys 400 kWe system linked to four diesel generators. Also solar panels or geothermal heat can be used as heat sources for the ORC system. By using these energy sources to heat up water in ...
By Againity AB based in Norrköping, SWEDEN.
-
Industrial compressors solutions for Food & beverage industry
Pioneers in the supply of compressors for the beverage industry. High and low pressure compressors for PET blowing and CO2 recovery in breweries. Since the 1980s offering customized solutions through careful design and engineering that ensures the robustness of the process compressors. More than 2,500 compressors in 120 countries, in collaboration with bottling and engineering converters. More than 100 field technicians around the world. Complete supply of the compressor. 10% more efficient than any other ...
By Abc Compressors Office in Piraeus, GREECE.
-
Rank Equipment for Waste Heat
The industrial sector is one of the most important energy consumers. That is why the recovery of waste heat in the industry through Rank equipment represents a measure of energy saving and efficiency that provides significant energy, environmental and economic ...
By Expander Tech S.L. based in La Vall d´Uixó, SPAIN.
-
Two-phase Cooling Technologies for Batteries Industry
Advancements in battery chemistry combined with demanding user needs such as fast charging are resulting in battery packs becoming increasingly difficult to thermally manage. Increased energy density is resulting in higher heat flux. Faster charging speeds are resulting in more heat dissipation. Lifetime is reduced if cells are not kept within 3°C of each ...
By Calyos based in Belgium, BELGIUM.
-
Green energy transition solutions for geothermal osmotic power sector
By integrating osmotic power and geothermal heat it is possible to obtain an energy optimizing synergy effect. The geothermal saline water is used to produce district heating and at the same time to produce electricity. The electricity produced through PRO can be supplied to the existing grid and used in the geothermal plant, hence reducing the energy consumption of producing district ...
By SaltPower based in Sønderborg, DENMARK.
-
Waste heat recovery solutions for maritime industry
Waste Heat Recovery Solutions for Energy-Efficient Shipping. Generate Clean, Renewable Electricity From On-Board Waste Heat With Climeon’s Award-Winning HeatPower ...
By Climeon AB based in Stockholm, SWEDEN.
-
Natural Isotope Solution for Geothermal Energy
The deep geothermal energy as base-load capable form of energy is an important component of the sustainable energy mix. The source of energy is hot deep groundwater which is used to generate energy. The generation raze depends on pumping rate, temperature and mineral content. However, the hot deep groundwater could also cause problems such as corrosion and scalings. It is important to understand the geothermal system in order to fine-tune it. Through several projects Hydroisotop gained significant experience with ...
By Hydroisotop GmbH based in Schweitenkirchen, GERMANY.
-
Organic Rankine Cycle Systems (ORC) for Solar Heat
Solar and geothermal heat can also be used as a heat source to the ORC system. By using solar panels to heat up hot water / hot oil, which is then stored in accumulator tanks, you can save the energy until the need arises, and then connect the hot water to the ORC system and produce electricity also after ...
By Againity AB based in Norrköping, SWEDEN.
-
Moving Bed Heat Exchangers for Cooling Catalysts
During both the production and regeneration phases of the catalyst life cycle, cooling is a vital step that enables operators to ensure optimal quality, preserve cracking sensitivities and mitigate material degradation and deactivation. Solex Thermal Science offers an indirect heat transfer solution for catalyst cooling that uses fluids and not air to reduce energy consumption, eliminate emissions, minimize product abrasion and offer the ability to recover low-grade energy in small, medium and large production ...
By Solex Thermal Science Office in Bridgend, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you