Geothermal Cooling Equipment For Geothermal
-
Manufactured by Geothermal Design, Incbased in USA
Horizontal Closed Loop Systems are commonly installed using a backhoe which opens a trench 2 feet wide and 6 feet deep. Three rows of polyethylene pipe are installed into the bottom of the trench at 6 feet deep, covered by 2 feet of soil, and a second layer of pipe is installed at 4 feet deep. The entire trench is back-filled and the series of 6 pipes is joined by a heat fusion process into 2 ...
-
Manufactured by Fecon, Inc.based in USA
The Fecon GL300 Geothermal Drill is a rubber track drill rig designed to meet the needs of the residential and small commercial geothermal industry. When it comes to drilling geothermal ground loops, crews want efficient access to the drill hole site, advanced drilling capabilities, and the ability to remove equipment with minimal environmental disruption. Get in. Drill down. Get out. The Fecon ...
-
Manufactured by Kaishan Compressor USAbased in USA
Kaishan is a leading manufacturer of organic Rankine cycle (ORC) power generation systems. Our products currently generate nearly 100 MW of power in facilities around the world, where they play a key role in curbing CO2 emissions and reducing overall environmental ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Choice of a particular power plant design is based on a number of factors, with resource temperature being one of the most important considerations. In general, low to moderate temperature resources lend themselves to a binary ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
This process model is similar to the model above but uses a two-phase geothermal resource instead of pumped brine. In this model, the two phase flow is separated with the steam directed to the vaporizer and the separated bring to the preheater. The steam condensate from the vaporizer is also pumped to the preheater. The spent brine is then directed to a reinjection system. The secondary working ...
-
based in SWITZERLAND
Cooling, heating, acoustic and air supply from a single source. The Hybrid radiant ceiling module from Barcol-Air combines the system functions required in an office to ensure thermal and acoustic comfort in a simple way. In addition it includes air discharge features and ...
-
Manufactured by Kupp Co., Ltdbased in SOUTH KOREA
PE pipe widely used in alternative energy development projects.PE geothermal pipes which are used as essential pipes for connecting geothermal heat pump systems and ground heat exchangers are widely used in government supported projects for sustainable alternative energy development and construction sites of medium and large construction companies.It is widely used in government supported ...
-
Manufactured by Geothermal Design, Incbased in USA
If there is sufficient water quantity and water quality, the home’s water well can provide the water for both domestic household purposes as well as for the geothermal system. There will be a discharge of water to a drain, ditch, stream or ...
-
Manufactured by Dandelionbased in USA
Water-to-water heat pumps transfer the underground heat energy from hot water or steam to indoor hot water or steam. This hot water or steam is then distributed within homes and businesses through radiators, hot water baseboard heaters, or radiant floor heating. When a hotter material comes into contact with a colder one, this temperature difference causes heat to naturally move from hot to cold, ...
-
Manufactured by Dandelionbased in USA
Water-to-air heat pumps transfer the underground heat energy from hot water to the indoor air distributed through a building’s ductwork. When a hotter material comes into contact with a colder one, this temperature difference causes heat to naturally move from hot to cold, so heat pumps are renewable and efficient. In the winter, water-to-air heat pumps supply forced-air heating; in the ...
-
Manufactured by Geothermal Design, Incbased in USA
Where land space is more limited or no pond is available, vertical closed loop systems can be installed into the ground by utiliizing a drill rig which bores open a series of vertical shafts or bore holes. Two polyethylene coils connected at the bottom by a fusion U-Bend are pulled into each bore hole and then grouted closed. Each pipe is connected into a central extended header and into the ...
-
Manufactured by Geothermal Design, Incbased in USA
Ponds with at least 10 feet deep water and a minimum half acre surface area make an excellent choice for a closed loop application. A pre-assembled heat exchanger made of polyethlyene plastic pipe is floated onto the surface of the pond, connected with an extended header, filled with a loop solution and submerged. Pond-coupled systems can reduce excavation costs and provide a lower installation ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations ...
-
Manufactured by Bostech Mechanical Ltd.based in CANADA
Our experts will come out to your home and do a no cost, no obligation consultation to see if a Geothermal System is right for you. They will do an energy analysis on your home and prepare a comparison report customized to your location. They also show pictures of the installation process from start to finnish and can provide references upon request.. This education process allows you to ...
-
Manufactured by Enertech Global, LLCbased in USA
Hydron Module Water-to-Water geothermal heating and cooling systems can deliver hydronic heat through radiant floor systems or forced air fans. Radiant heating and cooling creates a consistent room temperature with no moving air, eliminating the less comfortable aspects of forced air ...
-
based in USA
Many technologies have been developed to take advantage of geothermal energy—the heat from the earth. There has been a major emphasis on creating more alternative sources of energy. Geothermal systems are one of the most efficient systems available for heating and cooling. Geothermal power is cost effective, reliable, sustainable, and environmentally friendly. ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
EnergySmart is a full service geothermal company. We can design, permit and install residential geothermal systems for your MA home. We have installed hundreds of geothermal heating and cooling systems in new construction and ...
-
Manufactured by Dandelionbased in USA
Whether it’s a winter cold snap or a summer scorcher, the ground five feet below the surface maintains a constant temperature year round. This constant earth temperature is higher than average winter temperatures, and lower than average summer ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you