Geothermal Drilling Equipment Supplied In Australasia

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

The global geothermal drill bits market is segmented into tricone bits, polycrystalline diamond compacts (PDC) bits, and other bits such as drag bits. Geothermal drilling bits are used in dry steam power plants, flash steam power plants, and binary cycle power plants. Major types of bits used in geothermal drilling include tricone bits, polycrystalline diamond compacts (PDC) bits, and others ...

The K21 engine controller is designed for the off-road stationary diesel engine market. It is a cost effective entry level control panel. The controller’s primary function is the management of your diesel engine. The software and hardware are designed to be simple and easy to use. The K21 is used in the following in a basic application: waste water de-watering, irrigation pumping, ...

Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn 20, Centaur 40, Centaur 50, Taurus 60, Taurus 70, Mars 90,Mars 100 and Titan 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high pressure applications. C16 ...