Geothermal Heat Pump Equipment & Supplies

1" hose kit. Includes: 10' Hose, 2 pressure temperature port fittings, Two 1'' threaded by 1" barb fittings, Two 1'' threaded by 1" barb straight fitting, 4 hose ...

ICAX Limited designed the Concrete Solar Collector as part of the ICAX Solar Road System for use in Interseasonal Heat Transfer. A Concrete Solar Collector is an efficient means of collecting a large amount of warmth to raise the temperature of a ThermalBank from the natural temperature of the ground up to over 25°C: solar recharge of the ground. Black roads tend to absorb the heat of the sun ...

Istec’s BTU Meter measures the total energy used or transferred in a liquid system. BTU’s are calculated by multiplying the system temperature difference by the flow rate. The Model 4440 BTU Meter is an ideal choice for applications requiring a simple, compact and cost effective ...

A geothermal heat pump collects heat from the bedrock and groundwater with a circulating liquid (brine) in a collector tube. The drilling depth is adapted to the building’s heat demand (power and energy requirements) and will normally vary between 120 - 200 meters. There should be at least 20 meters between the boreholes so that they do not affect one another or cool each other down. HYSS ...

The ground source heat pump collects heat from a collector tube in the ground. The tubes should be in frost free depth, in other words, 1.0 - 1.5 meters deep. The distance between the tubes should be at least 1.0 meter to be sure that they won’t affect each other. The length of the tubes must be adapted to the building’s power and energy requirements for heat and hot water. A ...

The WaterFurnace 7 Series provides homeowners the ultimate in comfort and performance and represents our finest products. This line is for those who accept only the best and is built using the latest technologies and highest standards. The 700A11's ratings are vastly greater than ordinary conditioning systems and 30% higher than current two-stage geothermal heat ...

Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...

Free Energy’s vision is to provide solar-based energy systems that can deliver all the energy that a building could need. That's why we have developed HYSS - a hybrid heating pump - the most cost-efficient and environmentally friendly heating system on the market. HYSS - Hybrid Solar System - an innovative combination solution that utilizes solar heat and heat pump technology in an optimal ...

Ground source heat pumps provide hot water and heating for a range of properties including homes and businesses in what is one of the cleanest and most efficient ways to produce thermal energy. A ground source heat pump uses the constant latent geothermal heat in ground water to produce thermal energy ideal for heating and hot water. Ground source heat pumps use electricity and so for every 1kW ...

Many technologies have been developed to take advantage of geothermal energy—the heat from the earth. There has been a major emphasis on creating more alternative sources of energy. Geothermal systems are one of the most efficient systems available for heating and cooling. Geothermal power is cost effective, reliable, sustainable, and environmentally friendly. ...

Produce the heat you need and save thousands – invest in a commercial heat pumps installation and make the switch to renewable ...

A GSC Energy Pro loop is a prefabricated coil manufactured exclusively from WL Plastics PE4710 pipe, coiled in parallel and fused to a 180° fitting. The loop allows quick field installation of ground source heat pump vertical loop field designs. Geothermal Supply Company manufactures uncoils in standard and custom lengths to meet the requirements of your unique project installation. Loops are ...

The StealthGen Wind Generator is a new direct-drive wind generator, designed for a variety of microgeneration applications. It is exceptionally quiet and vibration-free in operation, qualities that are of paramount importance for any wind generator operating in close proximity to people. The StealthGen features a powerful 3-phase alternator, and computer-designed rotor blades optimised for low ...

Save Energy design, supply & install Ground Source Heat Pump Systems Why do you recommend a Ground Source Heat Pump? Nearly 75% of the energy required to run a Ground-Source heat pump is generated directly from the environment. Heat pumps are one of the most efficient heating and hot water technologies available – harnessing this energy. Heat pumps are able to produce more energy than ...

EnergySmart is a geothermal heat pump dealer for Water Furnace and Hydron Module brands. Having options means that we can choose the best and most appropriate geothermal heat pump technology and accessories for your specific ...

Energy Gain UK can: Design, Supply & Install the following Renewable Technologies. ...

Heat pumps work a bit like a fridge, but in reverse! Put simply, heat from the air or ground outside is absorbed by the pump, concentrated and then sent inside to heat your home. This free heat is delivered via underfloor heating systems or radiators. The really clever part is that heat pumps can produce 4 units of energy for every unit of energy they consume. This makes them an incredibly ...

Reduction of the costs by up to 75%, independence of fuel type, environmental-friendly system – these are the most important advantages of heat pumps. Of numerous advantages that are characteristic of heat pumps, the following are worth mentioning: lack of additional elements that have to be used in the models with traditional boilers, small overall dimensions that usually do not exceed one ...

Geothermal units use the solar energy stored just below our feet to provide heating, air conditioning and hot water. The earth acts as a giant solar panel absorbing roughly half of the sun’s heat energy. A series of pipes called a “loop” (see next page for more) is buried just below the frost line to tap into that stored energy. In the winter, heat is brought in through the ...

Ground source heat pumps work by absorbing heat from the ground and transferring the heat into buildings – to heat the buildings without burning fossil fuels. The heat pump itself is located in the building and works on the same principles as a domestic fridge: the heat pump in a fridge transfers heat out of the fridge and uses a heat exchanger to disperse the heat from a small radiator at ...