Geothermal Plants Equipment & Supplies In Latin America

Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...

The GEROtherm is a geothermal pipe system based on polyethylene (PE) that fulfills the wishes of the heat absorption, resp. its optimal releasing. Due to the complexity of geothermal plants as well as influencing the effectiveness of all installed components, all intalled system components have been matched in terms of fluid dynamics and thermodynamics each ...

Geothermal Steam Turbines operate typically with saturated steam, which is provided from a geothermal source. Their unique features and materials of construction lead to long-term, reliable operation in geothermal service. CTMI offers revolutionary portable Geothermal units up to 25 MW which offers flexibility in transportation and redeployment on the second well in case of failure of the ...

This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles are the usual field of application, also in ...

Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...

Automatic Clean Agent Fire Extinguishing Systems control the danger that can occur due to fire and protect all the equipment in the protected area without any damage. All products are designed and certified according to national and international ...

For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...

Copper and copper alloy U-bending tubes are manufactured using a cold working process, with the bending radius customized according to client specifications. These U-bend tubes can be produced from a wide range of ...

Along with its 150 years of experience in the electrical and mechanical engineering business together with its in-house capability for all major components, such as generators, steam and gas turbines, Ansaldo Energia offers multiple choices: from the turboset package, which can be supplied as a standalone equipment or by integrating the thermal cycle to provide the entire power island, to the ...

Above is the cluster map of the geothermal energy sector in Iceland which was issued by Michael Porter, a professor at the Harvard Business School 2016. It shows all the detailed and important links of the geothermal energy value ...

Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...

Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...

Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...

Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations ...

Liquid cooling outdoor cabinet ESS is an efficient energy storage solution that can be widely used in energy systems in various fields, such as solar power plants, geothermal power plants, grid regulation, energy management, and peak shaving, energy storage liquid cooling technology energy storage systems. In addition, energy storage liquid cooling technology can also be used in the construction ...

Resource conditions and project economics may allow a plant configuration that combines single-flash and binary technologies. In this arrangement, two-phase flow from the resource is directed to a separator in the same manner assingle-flash, but rather than injecting the separated brine, the brine is directed to binary equipment. There may also be other combined cycle arrangements, such as using ...

A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...

Geothermal power provides an answer to the needs regarding environmental protection and sustainable development: it's a source that works constantly, harnessing the Earth's natural heat. Italy is the country where geothermal energy was first harnessed for industrial purposes and is still one of the main producers of geothermal electric energy in the world. More than one hundred years have gone by ...

Historically, many projects that require drilling have been restricted by geography and cost. For example, most geothermal plants are limited to shallow access regions such as Iceland and Costa Rica, with prohibitively high initial drilling costs making it an expensive and risky ...

BCP™ 5000 Series Products (containing DTEA II™) remove pre-existing hard sulfur deposits and prevent elemental sulfur deposits in geothermal power plant cooling water systems. BCP™ 5000 Series Products (containing DTEA II™) penetrate, disperse and clean sulfur deposits in geothermal power plant cooling water systems as an 'on-line' cleaning program. When used in a regular ...