Geothermal Resources Equipment For Geothermal
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
Manufactured by Exergy International Srlbased in ITALY
Exergy designs and supplies Organic Rankine cycle binary plants for geothermal resources. The first and only radial outflow turbine working with an organic fluid gives outstanding performance and flexibility. The availability of products using flammable or non-flammable working fluids and synchronous or induction generator assures the best performance of Exergy ORC modules. These are available ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
-
Manufactured by Energent Corporationbased in USA
The Variable Phase cycle is a patented power system that generates power from waste heat and geothermal resources. The Variable Phase Turbine enables an efficient system for waste heat recovery and geothermal power ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat plant configurations are designed to take maximum advantage of the available geothermal energy resources at each site, and provide various binary plants implementations ...
-
Manufactured by Energent Corporationbased in USA
The Euler Turbine is a patented high efficiency turbine. The turbine is the basis of the Microsteam Turbine and has been applied to power generation from geothermal ...
-
by SaltPowerbased in DENMARK
SalPower is based on the technology of Pressure Retarded Osmosis (PRO). Two water sources with different salinity are mixed via a membrane to produce electricity. Water flows across the membrane and builds up pressure, and by passing the pressurized water through a turbine electricity is generated. ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Enhanced geothermal systems use well stimulation and hydroshearing technology to improve geothermal reservoirs. The hydroshearing process creates movement and sound in the rock, resulting in microseismicity. The opening and growth of fractures during stimulation is mapped by real-time measurement of the microseismicity. Using a micro-seismic array (MSA), AltaRock’s engineers and geologists ...
-
Manufactured by Fervo Energybased in USA
Our breakthrough technology leverages over a decade of innovation in drilling and production from modern oil and gas development, leading to major improvements in system performance and well design. We employ precision directional drilling technology to drill horizontally in geothermal reservoirs. This enables us to drill multiple wells from a single location, dramatically lowering our ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat Geothermal Combined Cycle Units (GCCU) are designed to generate power from high-pressure geothermal steam resources. When there are non-condensable gases present in the geothermal steam, our GCCU technology provides higher efficiency, lower maintenance costs and higher electrical output in comparison to conventional condensing steam power plants. Ormat offers GCCU modules in a wide range of ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
Choice of a particular power plant design is based on a number of factors, with resource temperature being one of the most important considerations. In general, low to moderate temperature resources lend themselves to a binary ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
This process model is similar to the model above but uses a two-phase geothermal resource instead of pumped brine. In this model, the two phase flow is separated with the steam directed to the vaporizer and the separated bring to the preheater. The steam condensate from the vaporizer is also pumped to the preheater. The spent brine is then directed to a reinjection system. The secondary working ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you