Geothermal Equipment & Supplies In Dominican Republic

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

The Active Cooler acts as a net-zero cooling to power solution, meeting the cooling system's requirements while generating clean electricity as a secondary function when the cooling load is not at peak demand. The Active Cooler (AC800) cools up to 800 kWth and can generate up to 75 kWe. Units can be configured to higher thermal loads. The Active Cooler Organic Rankine Cycle (ORC) process ...

Creating a Sustainable Future With Waste Heat Recovery. Convert Waste Heat Into Clean, Carbon-Free Electricity With Climeon HeatPower ...

Your own home is the perfect place to replenish geothermal energy. The installation of a Heliotherm ground source heat pump with surface collectors, adds to your garden creating an inviting place of rest and inexhaustible source of ...

This low temperature, waste heat recovery unit is ideal for heat sources above 70C. A simple and robust design along with proprietary technologies give the ElectraTherm ORC system the lowest heat requirements in its class while still achieving high efficiencies through inconsistencies in the heat source. This makes ElectraTherm's systems ideal for small-scale applications or those with varying ...

Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...

Geoflex has what you need... Whether you require a water to air (forced air heating and cooling), water to water (hydronic heating or chilling) or both within one unit, Geoflex can answer your need. As a North American manufacturer of Geothermal Heat Pumps, we can adapt to any configuration that you may require. Geoflex can offer trouble shooting services with units that have already been ...

Heliogen is developing a concentrated solar solution utilizing unique advanced computer vision software to precisely align an array of mirrors, reflecting sunlight to a target on the top of a tower. Powered by artificial intelligence (AI), our modular system aims to deliver low-cost renewable energy in the form of heat, power, or hydrogen fuel – whenever it’s needed, however ...

Lync’s Aegis A is a powerful commercial CO2 heat pump water heater powered by R744, better known as refrigerant grade CO2. Aegis A produces hot water up to 170°F at air temperatures as low as -4°F with no need for supplemental heat. By simply absorbing and moving heat from the surrounding area instead of needing to generate heat, this heat pump is extremely efficient thus saving ...

In this day and age, with skyrocketing fuel bills and the introduction of the Renewable Heat Incentive, an increasing number of people are turning to alternative means and renewable technologies when it comes to generating ...

With the flexoTHERM range, Vaillant provides the latest technological evolution of heat pumps. EVI (Enhanced Vapor Injection) technology achieves particularly high seasonal yield levels, far above those achieved with any other compressor technology, applied to water-to-water or geothermal heat pumps. This model of refrigeration circuit management allows working at high production temperatures, ...

Using our geothermal drilling tools and rotary heads enable customers to react swiftly at all times to ever-changing requirements, and at minimum cost. The advantages offered include: Swift mobilisation, efficient and time-saving working procedures, lower costs and increased competitiveness, safe working and minimal ...