Geothermal Equipment & Supplies In Latin America

CCm's heat recovery and storage units store thermal energy within a chemical reaction, much like a battery and releases it rapidly as the chemical reaction ...

Compressors and turbines usually consist of several stages. Each of the stages is composed of a ring of vanes and a rotating disk, on which the blades sit. With conventional designs, the blades are inserted individually into the ...

This installation is built from the following parts: Inlet valve. Gas/gas heat exchanger. Gas/water heat exchanger. Cold water machine. Coalescing filter. Gas pressure regulation with safety shut off valve. Outlet valve. Pressure regulator and pneumatic blow down valve. Condensate storage with pump. Instrumentatation (manometers etc.). ...

GtS provides gas mixing systems to add natural gas to geothermal gas to achieve a minimum caloric value. Also for other gasses GtS can design and build gas mixing stations, for example for adding air to biogas in order to make Active Carbon work properly or if the natural gas quality fluctuates a lot. In order to use geothermal gas, it has to be cleaned first. GtS can provide an installation that ...

The secondary network is heated from the geothermal installation. With this warm water, the heat is supplied to the grower in the collection ...

Up to half the annual energy consumed for heating domestic hot water can be generated with solar heat in Finland. Solar heat collectors can be connected to any central water-heating system and also utilised for the production of domestic hot water in a building with direct electric heating. Environmentally friendly energy can be produced from the sun for heating and producing domestic hot water ...

The GP400 is a high performance hammer which can drill under a head of water, typically suited to Waterwell and Geothermal applications due to its non-ported piston ...

Geothermal heat pump for advanced applications with a capacity of up to 1350 kW. Green technology – refrigerant R454B. Superior performance in heating (SCOP 5.44). Inverter technology precisely adjusts to real-time demand. Cascade function up to 16 units. Hot gas technology for efficient hot water production. One solution for heating, domestic hot water and cooling. Online – control ...

One of the types of drier which are produced in our factory is that in a fluid bed. It is based on the principle of the fluid bed vibrant with advancement of the cereal on a perforated plane, held in suspension by the directional flow of air blown in and by the vibrations of the plan itself. (The machinery is in fact used for roasting ...

Liquid cooling outdoor cabinet ESS is an efficient energy storage solution that can be widely used in energy systems in various fields, such as solar power plants, geothermal power plants, grid regulation, energy management, and peak shaving, energy storage liquid cooling technology energy storage systems. In addition, energy storage liquid cooling technology can also be used in the construction ...

Within our advanced portfolio to accompany the energy transition, Tenaris has developed a new generation of high performance hydrogen storage systems under extreme working pressure, combining the highest quality large steel tubular vessels with customized engineering services. All our hydrogen storage systems incorporate Thera™ technology - Tenaris Hydrogen Embrittlement Resistant Alloys - ...

More than 2150 steam turbines with the total capacity of 250 GW have been produced altogether. The steam turbines made by LMZ are under operation in 45 countries of the world. The steam turbines made by KTZ are under operation in 43 countries of the world. The first steam turbine manufactured by LMZ was put into operation in ...

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids are spread out over the plates. This facilitates the transfer of heat, and greatly increases the speed of the temperature ...

The ETD model takes advantage of the crystal precipitation when the solute overcomes the solubility limit. In order to obtain these outcomes, the plant has no submerged heat exchanger, but uses jacked exchangers to heat the fluids. The boiling tank is horizontal and the concentrate can reach the consistency of mud. The discharge occurs manually through the opening of the front ...

Hydronic air handlers for NetZero series heat pumps are small compact cabinets manufactured with heavy gauge steel and finished with a durable ArmorGuard™ baked on polyester finish. These units are engineered specifically for lower entering hot water temperatures making them a perfect match for geothermal heat pump applications. They feature single phase, 240V, permanent magnet, continuous ...

The Hütte HBR 204 GT represents state-of-the-art hydraulic drill rig technology specifically designed for geothermal drilling applications. Building upon the proven foundation of the HBR 205 GT, this model brings forth enhanced efficiency and productivity in a compact and lightweight frame. Despite its reduced size, it boasts the same maximum rotary head torque, along with powerful crowd and ...

Horsepower: 5 – 100 HP. Max. Discharge Pressure: 200 PSIG. Our Vector 6000 Series offers a compact cost-effective rotary screw compressor package utilizing a unique encapsulated unit that incorporates the compressor, oil/gas separator, oil reservoir and oil filter into one unitized ...

Build-in Intel micro processing unit, which can indicate many kinds of control and alarming information. Enable to see the working condition inner compressor clearly. The control system combined the engine, compressor and fuel control together, self-checking and reporting fault automatically. Perfectly adjust the engine’s speed and air inlet according to the real working condition and ...

Resource conditions and project economics may allow a plant configuration that combines single-flash and binary technologies. In this arrangement, two-phase flow from the resource is directed to a separator in the same manner assingle-flash, but rather than injecting the separated brine, the brine is directed to binary equipment. There may also be other combined cycle arrangements, such as using ...

A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...