Geothermal Equipment Supplied In Australasia

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

The global geothermal drill bits market is segmented into tricone bits, polycrystalline diamond compacts (PDC) bits, and other bits such as drag bits. Geothermal drilling bits are used in dry steam power plants, flash steam power plants, and binary cycle power plants. Major types of bits used in geothermal drilling include tricone bits, polycrystalline diamond compacts (PDC) bits, and others ...

Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...

The K21 engine controller is designed for the off-road stationary diesel engine market. It is a cost effective entry level control panel. The controller’s primary function is the management of your diesel engine. The software and hardware are designed to be simple and easy to use. The K21 is used in the following in a basic application: waste water de-watering, irrigation pumping, ...

The Dimpleflo Double Pipe Heat Exchanger (also known as “Tube-in-Tube”) is the simplest and most robust configuration of hygienic heat exchanger. Dimpleflo tube in tube heat exchangers are utilised for fluids containing stringy fibres, chunks or other particles and low-high viscosity ...

Solar’s C16 family of gas compressors are designed for single-body and tandem applications with the Saturn 20, Centaur 40, Centaur 50, Taurus 60, Taurus 70, Mars 90,Mars 100 and Titan 130 gas turbines. These compressors combine high efficiency and wide flow range with a robust design and ease of restaging. They are particularly well suited for low flow and high pressure applications. C16 ...

The Agenitor is a highly efficient power plant with optimsed gas engine and lower fuel costs. This engine is a result of intensive work by the 2G development team at 2G Drive GmbH. It's improved combustion chamber geometry has made it possible to increase the efficiency of the Agenitor range. ...

Historically, many projects that require drilling have been restricted by geography and cost. For example, most geothermal plants are limited to shallow access regions such as Iceland and Costa Rica, with prohibitively high initial drilling costs making it an expensive and risky ...

Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...

In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...