Geothermal Equipment Supplied In France

Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...

The heat pump extracts the heat found in the ground or the groundwater and returns it to you very cheaply to heat your home or even cool it down in summer. ...

NEUTRAGUARD® NEO, with a Mono Propylene Glycol base and corrosion inhibitors, is a concentrated anti-freeze heat transfer fluid used in the circulation of central heating, solar thermal, underfloor heating and geothermal. Once diluted in water, NEUTRAGUARD® NEO provides excellent protection against frost and reinforced protection against corrosion of either old or modern metals present in ...

Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...

In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...

Cogeneration is the simultaneous generation of electricity and useful heat from a single process involving significant savings in primary energy and the subsequent reduction in emissions of greenhouse gases. Simultaneous generation of electricity and thermal energy is energy produced at the point of consumption, preventing transmission grid losses, with potential energy efficiency of up to ...

On the strength of our experience and permanent contact with winegrowers, Lamouroux has developed a range of coil-type heat exchangers which stand out by their efficiency. These coil-type exchangers offer a higher output than other types of exchangers. The tubular exchangers are entirely designed in our workshops and are made of cold-rolled stainless steel. The range includes models of all sizes, ...

Compact and evolutionary, Barriquand plates and gaskets heat exchangers offer excellent thermal performances for all your fluid heating / cooling applications in chemical / pharmaceutical, agriculture / food, climate engineering, diverse ...

Every situation demands a precise and complete analysis of the heating equipment requirements, according to the type of crops, the type of greenhouse, the equipment and the geographical location. We study and design your heating system to achieve optimal performance for the growth of your crop, while also optimising your energy ...

Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...

Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, thereby allowing advancement of the throttle to ...