Geothermal Equipment Supplied In USA

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

Specac’s Electrical Heating Jacket is designed to allow the study of solid and liquid samples over a temperature range from ambient to circa 250°C, via transmission spectroscopy ranging from the Far UV through to the Far IR. The variation in temperature is achieved by heating the Electrical Heating Jacket from its dedicated 30-volt supply 4000 Series power controller whilst a particular ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...

The Active Cooler acts as a net-zero cooling to power solution, meeting the cooling system's requirements while generating clean electricity as a secondary function when the cooling load is not at peak demand. The Active Cooler (AC800) cools up to 800 kWth and can generate up to 75 kWe. Units can be configured to higher thermal loads. The Active Cooler Organic Rankine Cycle (ORC) process ...

Our breakthrough technology leverages over a decade of innovation in drilling and production from modern oil and gas development, leading to major improvements in system performance and well design. We employ precision directional drilling technology to drill horizontally in geothermal reservoirs. This enables us to drill multiple wells from a single location, dramatically lowering our ...

This low temperature, waste heat recovery unit is ideal for heat sources above 70C. A simple and robust design along with proprietary technologies give the ElectraTherm ORC system the lowest heat requirements in its class while still achieving high efficiencies through inconsistencies in the heat source. This makes ElectraTherm's systems ideal for small-scale applications or those with varying ...

Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...

Heliogen is developing a concentrated solar solution utilizing unique advanced computer vision software to precisely align an array of mirrors, reflecting sunlight to a target on the top of a tower. Powered by artificial intelligence (AI), our modular system aims to deliver low-cost renewable energy in the form of heat, power, or hydrogen fuel – whenever it’s needed, however ...

Lync’s Aegis A is a powerful commercial CO2 heat pump water heater powered by R744, better known as refrigerant grade CO2. Aegis A produces hot water up to 170°F at air temperatures as low as -4°F with no need for supplemental heat. By simply absorbing and moving heat from the surrounding area instead of needing to generate heat, this heat pump is extremely efficient thus saving ...

P.E. Manifolds (inside headers) are socket fusion connections. All manifolds come in pairs when ...

2 stage Ultra- Tech Scroll Compressor - Left return, Variable speed Fan, Hot Water Generator- vFlow internal flow center, 23.95 EER 4.55 COP ground loop, Single Phase 208/230 voltage, 22.4" W X 25.6"D X 48.5 H 298 lbs, 21.4 FLA 25.2 min circuit ...

Water-to-water heat pumps transfer the underground heat energy from hot water or steam to indoor hot water or steam. This hot water or steam is then distributed within homes and businesses through radiators, hot water baseboard heaters, or radiant floor heating. When a hotter material comes into contact with a colder one, this temperature difference causes heat to naturally move from hot to cold, ...

Water-to-air heat pumps transfer the underground heat energy from hot water to the indoor air distributed through a building’s ductwork. When a hotter material comes into contact with a colder one, this temperature difference causes heat to naturally move from hot to cold, so heat pumps are renewable and efficient. In the winter, water-to-air heat pumps supply forced-air heating; in the ...

ATES is an innovative open-loop geothermal technology. It relies on seasonal storage of cold and/or warm groundwater in an aquifer. The technology was developed in Europe over 20 years ago and is now in use at over 1,000 sites, mostly in The Netherlands and Scandinavia. ATES is essentially unheard of in the US, with the exception of the ATES project at Richard Stockton College in Pomona, New ...

Unlocking Energy Storage Potential with Sage Geosystems. Sage Geosystems is at the forefront of developing advanced energy storage technologies. Our solutions enable the efficient storage of energy during periods of low demand, maximizing the utilization of renewable energy sources such as wind turbines and solar arrays. ...

The GeoCube is a state-of-the-art polished silver aluminum thermal conductivity / thermal response test unit. Built for portability, durability and ease of use, the unit is ready to tackle your TC/TRT test needs in a range of environmental and geotechnical conditions. The GeoCube's centralized data collection system ensures rapid and efficient data transfer to the included PC-based software ...

The rugged Grundowinch line of hydrostatic constant-tension winches are specially designed for the variable conditions in below-grade work. All models feature protective cable storage and are available with an air-cooled diesel or gas engine; as well as an adjustable boom system. Portable and powerful, Grundowinch is well-suited for underground utility construction applications ...