Hydro Energy Equipment & Supplies In Equatorial Guinea

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

The HT15E power unit is driven by a 15HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S4TLP. Other hydraulic tools and equipment may also operate from this power ...

The HT20EV power unit is driven by a 20HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3CML, S3VHL and S4T. Other hydraulic tools and equipment may also operate from this power ...

Specac’s Atlas Power hydraulic press is available in 8 Ton, 15 Ton, and 25 Ton load configurations for industrial XRF applications and other laboratory sample pressing ...

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...

This portable diesel power pack is ideal for driving our 2″ pumps and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

This power unit features a 22 HP Honda OHV gas engine, extended run fuel tank, extra oil cooling and easy handling. It is available with a fixed displacement gear pump or pressure compensated piston pump. Great for continuous duty applications powering our pumps or other hydraulic tools and equipment. Variable speed throttle controls hydraulic ...

Crisafulli skid mounted and trailer mounted power units, powered by electric motors or diesel engines, that have PTO take offs or hydraulic systems. To provide hydraulic power to Crisafulli Hydraulic Pumps, Crisafulli builds Crisafulli Standard Power Units in four configurations, each either skid or dual axle mounted - i.e., Crisafulli Diesel/Hydraulic Power Units, Crisafulli Gas/Hydraulic Power ...

This portable and rugged diesel power pack is ideal for driving our 3" trash pumps and even our 6" high-volume propeller pump. It also can provide hydraulic power to run many other hydraulic tools using the variable speed throttle to control hydraulic ...

This popular unit features a Deutz diesel engine and pressure compensated hydraulic pump for maximum versatility and enhanced performance when driving submersible pumps or other hydraulic ...

This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

The HT25DYS power unit is driven by a Yanmar Diesel T4F engine and is designed to drive several of our pump models including the S3CML, S3VHL, S4T, S4CSL, S4SCR, S4SHR and S8M. A built-in fuel tank allows this unit to run up to 24 hours between refills. Other hydraulic tools and equipment may also operate from this power ...

The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...

This Sound Attenuated unit is designed to be used in residential areas and other locations where low sound levels are required. Powered by a 156 horsepower John Deere diesel engine, the HT150DQV can drive several of our pumps (and other hydraulic equipment) with flow and pressure requirements of up to 70 GPM 2700 ...

The HT150EV power unit is driven by a 150HP 460 V, 3Ø, TEFC electric motor for use where electric power is available. It is designed to drive several of our pumps or other hydraulic equipment and tools. Several control options are ...

The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is ...

This Sound Attenuated unit is designed to be used in residential areas and other locations where low sound levels are required. With a Tier 4 Yanmar diesel engine and large fuel tank, the HT50DQV can run continuously for long periods between ...

The HT60EV power unit is driven by a 60HP TEFC electric motor for use where electric power is available. It is designed to drive several of our pump models plus many other hydraulic tools and ...

This compact and rugged diesel power unit features an extended run fuel tank, extra oil cooling and easy handling. Great for continuous duty applications powering our pumps or other hydraulic equipment using the variable speed throttle to control hydraulic ...