Hydro Energy Equipment Supplied In Europe

Spherical valves are used as safety and shut-off equipment for turbines and pumps in conditions under high operating pressure. They close automatically without outside energy; in emergency cases, even against unidirectional pressure at maximum flow rate. ADAMS spherical valves are welded constructions or forged using high quality steels. They generally have two sealing ...

Reflectometer RIF-9 can be used to detect, determine the type of and distance to various inhomogeneities (couplings, branching, etc.), determine the total length (including on drums and in bundles) as well as the velocity factor of balanced and unbalanced power cables and communication lines up to 120 km long. When locating cable faults, the reflectometer RIF-9 can be used standalone for ...

The wind turbine WTN 500 is a pitch-controlled turbine with complete variable speed for operation parallel to the public grid. The rated output of the plant is 500 kilowatt; the rotor diameter is 48 ...

Metrosil silicon carbide varistors are manufactured by M&I Materials in the UK, and trusted worldwide as surge protection devices that provide excellent service in a wide range of applications. At M&I Materials we have been developing and producing Metrosil for over 80 years and pride ourselves on delivering manufacturing excellence and high standards of technical support. Metrosil is ...

Uses: Combustion of Wood Chips, Residual Lumber, bark, wood from the landscape and draw ...

Inaventa Solar delivers cost-competitive solar heating solutions based on Norwegian technology. Our solar collectors are of high-quality design, produced at our own factory in Jevnaker using solar energy and clean hydropower, and recyclable materials only. We strive to ensure that our climate footprint is a small as possible. Our solar collectors are delivered either as integrable building ...

OPT’s PB3 can act as an Uninterruptable Power Supply (UPS) which constantly recharges itself by harvesting energy from the waves. It is ocean-deployed, moored and floats over the point of use and can operate in any ocean depth over 20 meters and up to 1,000 meters (1 ...

OCEANERGY currently develops the KITE H2 SHIP technology, which is a special form of the KITE GAS/FUEL SHIP: Its aim is to produce green hydrogen, and deliver it to H2 terminals in a harbour, at a lower cost than with any other production technology or scenario. Low H2 production cost is possible because of the KITE H2 SHIP’s. extraordinarily high capacity factor of 80-90% per annum, 100% ...

The OP16 Gas Turbine has an all-radial design which provides robustness, reliability, high efficiency, and low emissions. OPRA Turbines advanced combustion systems offer multi-fuel capability giving the OP16 the ability to handle a wide range of liquid and gaseous ...

Basic Boiler Container consists of metal frame, walls and roof that protects wiring and equipment and the boiler itself from strong winds, precipitation and cold temperatures. The insulation inside the walls keeps the system in optimal working temperature even in most hazardous temperatures down to -30 degrees ...

The digital control system DTC-Vario is the most recent development of entec for controlling, supervision, protection, data acquisition and visualisation of small hydro power stations. Based on a hardware from SAIA, entec developed the appropriate software. Entec’s long term experience in the field of small hydro power stations is reflected by versatile possibilities of this ...

We offer generator sets powered by diesel fuel with power ranging from 9.5 kWe to 2500 kWe. Complete installations may consist of up to 32 units operating in a parallel synchronisation ...

This product have high reliability and durability high ...

Synchronous generators from LDW are highly versatile and are used in shipbuilding, power stations and many other applications. Our generators can be driven by gas, steam or water turbines as well as diesel engines and other drivers. Synchronous generators from LDW have a high degree of efficiency and operate with extreme effectiveness. We develop and manufacture generators of the ...

Superior strength, ground clearance, and capacity is found in the a-series' largest loaders, the a7236 and the a7545. Norcar a7236 has high specifications already as standard. A four-cylinder diesel engine and dual working hydraulic pumps prepares the machine well for work with tools requiring high hydraulic pressure. Several functions can be used simultaneously without affecting each other, ...

Pumped hydro in the UK currently relies on low cost off-peak coal or nuclear power. The Venturo pumped hydro generation system uses no electric power to pump water and simply uses existing or enlarged water storage on farms - giving remote areas megawatts of power potential to feed into the grid when there is no wind, as well as giving farmers and wildlife more water for use in ...

PVA series. Its salient features are: big flow clearance, perfect for lifting water containing sludge, and automatic flow control which occurs automatically according to the height of water in the loading well ...

The static excitation system is based on a robust modular design, engineered and designed to meet all modes of operation of large synchronous generators. The system is characterized by high accuracy, reliability and speed. The main characteristics of this system are: dual-channel redundant configuration, automatic voltage regulator, adjustable PID type, excitation current regulator, higher-level ...

Output: 0,75kW – 355kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 80–160. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 | IC416 (option). Insulation class: F. Duty type: S1 | S2 | S3. Standards: IEC 60034-1-30. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...

The most important energy facilities (thermal and hydro power plants, large transmission substations, etc.) should have the highest possible reliability of power supply because the possible damage caused by a power supply failure at a critical moment can surpass by far the price of power supply. The right choice for such facilities is redundant parallel connection of two completely independent ...