Hydro Energy Equipment Supplied In Sweden

26 equipment items found
  • Manufactured by ENO Energy GmbH
    based in GERMANY

    The latest feed-in technology and robust turbine construction. The eno 100 stands for highest efficiency of turbine design. Based on the tried and tested platform eno 92, the wind turbine has the ideal combination of compactness, solid machine construction and increased yield with a rotor diameter of 100 metres and thus around 18 percent more rotor surface area. The design of the eno 100 takes ...

  • based in SWEDEN

    WaveSpring technology amplifies the motion and power capture. This negative spring function provides 3x increase in energy production for a given buoy size, strongly increasing revenue to ...

  • Manufactured by W4P Waves4Power AB
    based in SWEDEN

    The creation of a new industry does not happen very often. But this is really what Waves4Power is all about. We are building a new European energy industry that is totally fossil free and renewable. Waves4Power is a leading player in the green marine energy industry which is expected to be the future in energy production for Europe as well as the rest of the ...

  • The World’s Most Sustainable Balancing Power Enabling a Fossil-Free Generation. ...

  • Manufactured by Biogas Systems AB
    based in SWEDEN

    The compressed intake air and biogas are ignited in the combustion chamber. The gases then pass through the turbine at high pressure and drive the generator. A turbine installation consists of a complete turbine assembly with gas compressor and monitoring equipment, with or without a heat exchanger for producing hot water. Biogas Systems AB supplies gas turbines with a generation capacity of 100 ...

  • Manufactured by Tenmat ltd
    based in UNITED KINGDOM

    FEROGLIDE bearings consist of a woven PTFE fabric with strengthening fibres applied to a metal backing. FEROGLIDE bearings are typically used in valves, hydro power equipment, lifting equipment and many other applications. Valve manufacturers value the FEROGLIDE stainless steel and Inconel 625 grades due to their high load carrying capability and chemical ...

  • Manufactured by KraftPowercon
    based in SWEDEN

    Our UMD systems are ideal for critical processes, where interruptions to the power supply may cause serious damage or loss in production. They secure the motor drive, maintain full effect if there is a power shortage and create reliable, secure and profitable ...

  • Manufactured by Bevi AB
    based in SWEDEN

    BEVI offers asynchronous and synchronous generators up to approx 10000 kW. Special executions are made on ...

  • Manufactured by Sulzer Ltd.
    based in SWITZERLAND

    Many industries aim to reduce their ecological footprint by minimizing energy consumption. Sulzer Hydraulic Power Recovery Reaction Turbines can be used to capture lost ...

  • based in SWEDEN

    Hexicon’s patented TwinWind™ technology is a gamechanger in the offshore wind industry. By utilizing two turbines on one foundation, TwinWind™ enables more power to be produced per sea area when compared to single-turbine systems. This further reduces the levelized cost of energy providing lower electricity prices for consumers whilst minimizing the impact on the environment ...

  • based in SWEDEN

    DECARBONIZATION AND ELECTRIFICATION ARE DRIVING A MASSIVE CHANGE IN OUR ENERGY SYSTEM. Mine Storage provides a storage solution with a unique, modular design, and reliable functionality. Our design is a fast response, closed loop system in old mines. By using mines, we minimize the environmental impact, reduce construction costs, and utilize existing infrastructure such as grid ...

  • Manufactured by NoviOcean by NOVIGE AB
    based in SWEDEN

    Easy Produce, Install and Maintain;Simple Well Proven Parts, Modular Design, High Survivalbility. Environment; Low Visual and Audible Signature. Low Environmental Footprint. Cost Efficient; Weight tPower : ½ vs Offshore Wind. LCOE 1/3 vs start of Wind & Solar. Power TWeight Rati: 2-50 vs Wave Energy ...

  • Manufactured by Bevi AB
    based in SWEDEN

    PLC controlled excitation equipment can be delivered separately when modernizing e.g. hydroelectric power plants. Our equipment is adapted for different types of power regulations and feeding to the exciter or directly to the generator slip rings. Different types of rotor monitoring can be built into the ...

  • based in SWEDEN

    Ocean energy is a renewable energy source, in which electricity can be generated from tidal streams, waves or differences in salinity. Over 70 per cent of the Earth is covered by water. The ocean is subject to the impact of wind, tides and ocean currents and thus carries with it large quantities of energy. This means that the 'fuel' is inexhaustible and free. The different forms of ocean energy ...

  • Manufactured by Minesto AB
    based in SWEDEN

    Imagine that you are standing on a beach, flying a kite in the wind. You feel the strong lift force from the kite in the rope as the wind tries to carry the kite away. As you move the kite sideways, you notice that it flies fast – way faster than the wind is blowing. If you would attach a turbine to the kite and put it in the ocean, where a water current flows instead of the wind ...

  • based in SWEDEN

    Experience hydraulic precision with our HyFit solution, offering truly fitted, expanding coupling bolts for secure and efficient ...

  • Manufactured by EndressHauser AG
    based in SWITZERLAND

    Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...

  • Manufactured by Rotork plc
    based in UNITED KINGDOM

    Hydraulic power units (HPU) complement our extensive offering of rotary and linear actuators. We have over three decades of experience in their manufacture with units in service in a variety of plants and pipelines in locations spanning the ...

  • Manufactured by ENO Energy GmbH
    based in GERMANY

    General: Rated Power: 5.6 - 6.0 MW. Cut-in wind speed: 3 m/s. Rated wind speed: 13 m/s. Cut-out wind speed: 25 m/s. Tilt angle: ...

  • Manufactured by ENO Energy GmbH
    based in GERMANY

    Reliability, performance and yield are the top priorities for low wind regions. The 66.8-metre-long rotor blades of the eno 136 represent an optimised flow of air and the aerodynamic high-performance design ensures maximum yields and economy of the wind turbine in low wind regions. With 14612m² of coated rotor area, 4,500 Kilowatts of rated output, the eno live.train solution and the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you