Hydrogen Energy Equipment & Supplies In Ivory Coast

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. - Very high efficiency up to 105% for optimised energy costs - Compact design for easy positioning and effective use of heat - Flexible application and low return flow temperature of 50 °C possible - Specific control concept and optional real-time monitoring - ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

Cell scanning: Mixed: 29x SC (1C), 100x TC (3C). Contact design: 0.4 mm spring wire with 1/2 A-shape. Contact bearing: In PCB one-sided with redundant contact pin. Interlocking type: Vertical-pressure-lock. Contact pitch min.: 1.715 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Graphite. Connection typ: Flexcard. Benefit (USP): Modular positioning and locking ...

Cell scanning: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing. In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole. Contact pitch min.: 1.015 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Wired solution allows CVP connection even at ...

The HB-SC-50 liter Hydrogen Fuel Cartridge is designed to be used as a standard storage for our portable FID based instrument and to act as a back up hydrogen source at room temperature. This hydrogen storage system is based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

Cell scanning: Single Cell SC (1C). Contact design: 2mm MultiLam. Contact bearing: In housing body, floating. Interlocking type: Positive Lock in plastic body. Contact pitch min.: 2.000 mm. Pinhole/ Geometry: Rectangle 2x2 mm. Bipolar plate material: Graphite. Connection type: Wired Benefit (USP): Commercial contact with very good availability. Robust design. Application: Series application, ...

The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

The Pure Energy Centre is dedicated to pioneering the design and development of high-pressure hydrogen filling stations and dispensers, ranging from 350 to 700 bar for maximum safety. Our journey began in 2005 and has led us to establish a cutting-edge 700 bar 24/7 hydrogen dispensing facility today. With a proven track record, we have garnered expertise in every aspect of hydrogen alternative ...

Fuel cells provide clean energy. A fuel cell is actually just an electrochemical device that is able to convert hydrogen into electricity and heat, using only a catalyst and oxygen. Water is the only by-product, making fuel cells not only environmentally friendly, but also very efficient. In many ways, fuel cells are just like ordinary batteries. But when an ordinary battery runs dead and needs ...

Reliable and efficient power supply has become increasingly important across the globe in recent years. State-of-the-art technologies for highly efficient power generation include gas and diesel engines as well as gas turbines and fuel cells. Emissions from these engines can exceed the desired emission levels. In combination with catalytic emission control as a secondary measure, regulatory ...

In situations where plant space is at a premium, customers may want to site their electrolysers outside. At other times customers may want to configure an electrolyser for a more turnkey operation. To satisfy those needs, we suggest containerization. MC electrolysers deliver the M Series platform in a containerized form for easy outdoor installations. The M Series PEM Technology makes for a ...

In November 2020, Doosan Enerbility signed a contract to build Korea’s first hydrogen liquefaction plant. Doosan will be handling the EPC work, as well as the operation & maintenance services for 20 years after the plant has been built. The plant, which is to be built on the grounds of Doosan Enerbility’s Changwon headquarters by 2022, will have the capacity to produce 5 tons of ...