Hydrogen Energy Equipment & Supplies In Nicaragua

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

Cell scanning: Mixed: 29x SC (1C), 100x TC (3C). Contact design: 0.4 mm spring wire with 1/2 A-shape. Contact bearing: In PCB one-sided with redundant contact pin. Interlocking type: Vertical-pressure-lock. Contact pitch min.: 1.715 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Graphite. Connection typ: Flexcard. Benefit (USP): Modular positioning and locking ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

Cell scanning: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing. In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole. Contact pitch min.: 1.015 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Wired solution allows CVP connection even at ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

The HB-SC-50 liter Hydrogen Fuel Cartridge is designed to be used as a standard storage for our portable FID based instrument and to act as a back up hydrogen source at room temperature. This hydrogen storage system is based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

Cell scanning: Single Cell SC (1C). Contact design: 2mm MultiLam. Contact bearing: In housing body, floating. Interlocking type: Positive Lock in plastic body. Contact pitch min.: 2.000 mm. Pinhole/ Geometry: Rectangle 2x2 mm. Bipolar plate material: Graphite. Connection type: Wired Benefit (USP): Commercial contact with very good availability. Robust design. Application: Series application, ...

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. - Very high efficiency up to 105% for optimised energy costs - Compact design for easy positioning and effective use of heat - Flexible application and low return flow temperature of 50 °C possible - Specific control concept and optional real-time monitoring - ...

BGEm by ELI BioScience is a unique blend of methane forming bacteria called acetolactic methanogens as wall as hydrogen oxidizing methanogens. These microbes have been Isolated and stabilized in BGEm for their effectiveness to convert acetate and methyl to methane. Hydrogen oxidizing methanogens aid in producing hydrogen ions which react with available carbon dioxide to increase methane ...

The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

Porous burners emit due to the extremely high surface temperature more infrared radiation than conventional radiation burners. As the heat transfer through thermal radiation is higly efficient, porous burner are the ideal solution for applications which necessitate fast and homogeneous heating. Porous burners can be designed to comply with customer requirements and are therefore suitable for a ...

The IRD Fuel Cells production plant is both suitable for customised prototype manufacturing for customers who require pre-commercial volumes, as well as for reliable supply of components within a large scale manufacturing ...

Maritime industry drastically needs to cut emissions, to comply with further global goals. Marine shipping is well-known to be a significant source of greenhouse gas and particulate emissions. IMO has an ambitious target of reducing carbon emissions by 40% by 2030 and 70% by 2050, according to 2008 values. In addition, GHG reduced by at least 50% by 2050. Hydrogen will be essential to support the ...

Available Power - NEVI charging locations require (4) 150 kW fast chargers operating simultaneously (600 kW of power), which electric grids may not be able to ...

KCE's mobile microgrid provides clients 150 kW's of power with no local emissions or grid connection. On-site hydrogen production and fuel cells are used to produce electricity for EV charging and power generation. A 5k gallon atmospheric fuel tank provides 36 MWh of energy. FRONT VIEW (8' X 10') The microgrid meets NFPA 2 requirements and can also support H2 fueling ...