Hydrogen Energy Equipment & Supplies Near Australasia

773 equipment items found
  • Manufactured by DEWESoft
    based in SLOVENIA

    Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...

  • Manufactured by DEWESoft
    based in SLOVENIA

    Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...

  • based in AUSTRALIA

    Electrolysers use electricity to split water into hydrogen and oxygen and are the key technology for producing green hydrogen. Green hydrogen is widely acknowledged to be a crucial part of reaching net zero emissions globally, enabling decarbonisation of hard-to-abate sectors like steel, heavy transport and chemicals. It is expected to supply 15-25% of energy in a net zero global economy, ...

  • Manufactured by Inoplex
    based in AUSTRALIA

    The Inoplex Renewable Energy Generator (REG) is a highly efficient system designed to convert waste into energy through a combination of gasification and cogeneration. This innovation emerges from years of rigorous development and research, aimed at addressing Australia's escalating waste and energy crisis. The REG system offers a scalable solution that efficiently reduces waste management costs ...

  • Manufactured by SAACKE GmbH
    based in GERMANY

    Use instead of waste. The ROTONOX GL uses rotary atomiser technology to burn a wide range of gaseous and highly viscous liquids more economically and with lower emissions than any other burner. Even contaminated oils and biogenic fuels are no problem for the ROTONOX GL and underline the strength of the robust design. The rotary atomiser technology offers maximum reliability with optimum burnout, ...

  • based in AUSTRALIA

    The Wave Swell Energy (WSE) technology is based on the well-established concept of the oscillating water column (OWC). The OWC is an artificial blowhole consisting of a chamber that is open underneath the waterline. As waves pass the OWC, the water rises and falls inside, forcing the air to pass by a turbine at the top of the chamber. This turbine generates ...

  • Manufactured by Uprise Energy, LLC
    based in USA

    The Mobile Power Station is purposely designed to extract as much energy from the wind as possible and keep parasitic losses to a minimum during the delivery process. Every component of the wind turbine has been examined in excruciating detail and refined to achieve the highest possible performance. The culmination of these efforts results in meaningful gains across a range of systems and ...

  • based in UNITED KINGDOM

    The Precision Hydrogen Trace 1200 generator is designed primarily for GC carrier gas use, and can also be used for detectors requiring hydrogen fuel gas such as FID and FPD. One generator is capable of supplying multiple GC instruments. This generator offers a safe, reliable and convenient solution for those using hydrogen for GC carrier gas, producing the highest purity of hydrogen from the ...

  • based in USA

    Centaur®gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...

  • based in UNITED KINGDOM

    The GLO annealing furnace features a vacuum tight retort with highly symmetric positioning of the heating elements. The heating elements are CrFeAl, also known as APM, and are embedded in the ceramic fibre insulation. The GLO is often equipped with a vacuum pumping system to reduce the Oxygen levels prior to heat treatment. To ensure the lowest possible contamination levels, several cycles of ...

  • Premium
    based in GERMANY

    The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...

  • Premium
    based in GERMANY

    The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

  • Premium
    based in GERMANY

    AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

  • based in ITALY

    For more than 20 years, SolydEra’s international expert team has been realizing and mass-producing cutting-edge innovative energy solutions based on the proprietary Solid Oxide Fuel Cell (SOFC) and stack ...

  • Manufactured by H2 4U Pty Ltd.
    based in AUSTRALIA

    Green H2 4U Pty Ltd’s intellectual property enables us to build specialist High Temperature Waste Gasification plants that convert over 90% of waste materials into Green Hydrogen, energy and valuable ...

  • based in ITALY

    Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...

  • based in AUSTRIA

    The system take a very small gas sample proportional to the velocity in the stack using EN/ISO 13833 standard. Sample size varies from 0,2 to 30 ml/min. The velocity in the stack is measured using the ...

  • Manufactured by Powerhouse Wind Ltd
    based in NEW ZEALAND

    The PowerCrate is an all-in-one stand-alone power system designed and built by Powerhouse Wind. The combination of diverse energy generation and storage, rapid deployment and remote monitoring makes PowerCrate an ideal solution for your remote energy needs: off-grid, edge of grid or boosting energy resilience in an uncertain ...

  • Manufactured by Fabrum
    based in NEW ZEALAND

    A cryocooler is a mechanical device utilizing a refrigeration cycle, designed to cool an item to a temperature so low that ordinary gases become liquid. Whilst many variations of cryocoolers are available, few systems can provide industrialised functionality. The AFCryocooler systems require very low maintenance and can run in harsh environments with no degradation to cooling performance over ...

  • Manufactured by Fabrum
    based in NEW ZEALAND

    Green Hydrogen or Liquid Hydrogen is fast positioning its rightful place as a significant future fuel. The Fabrum Team have pioneered a Green Hydrogen solution that delivers the future today. Read on for the fundamentals of this super fuel, details of how this looks for heavy transport and what’s to come with aviation. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you