Incineration Equipment Supplied In Connecticut

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

The Zeeco RW burner is a premixed radiant wall ...

The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...

The Zeeco AK Staged Air Low Emissions Burner is a round flame combination oil and gas ...

The Zeeco CLSF Free-Jet burner is a Next Generation emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Free-Jet combination burner in operation at our combustion test facility. This design offers state-of-the-art NOx reduction for combination oil and gas firing. NOx reduction for gas firing is achieved by the Free-Jet method of mixing the fuel gas with the inert ...

Precision Combustion Inc. is developing integrated fuel processor systems to enable fuel cells to operate using a wide range of available fuels ranging from gases (e.g. methane and propane) to conventional liquid fuels (diesel, gasoline and military logistics fuels including JP-8, JP-5, and Jet A) to alternative and unconventional liquid fuels such as biofuels and waste hydrocarbons recovered ...

TITAN offers refurbishment services, including the replacement of platinum catalytic pads and preheat elements for TITAN heaters and other manufacturers including: Vulcan Systems, Vulcan Catalytic, Heraeus, PED, IPE / Industrial Process, Equipment, Monark Equipment, Solar Products, Wisconsin Oven, Trimac Systems and Bruest Catalytic ...

The Zeeco CLSF Min-Emissions burner is an Ultra-Low NOx emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Min-Emissions combination burner in operation. The reduced NOx emission from oil firing is achieved by “Pseudo Staging” of oil by our CB oil gun design. The result is a burner that can achieve very low NOx emissions with a great turndown. For ...

The R&D Dynamics AdvancedPower™ 170 kW ORC (Organic Rankine Cycle) system has been designed to generate electricity from low grade waste heat. At its heart is a reliable, high efficiency, foil gas bearing supported ...

Midwesco Filter Resources/TDC Filter's pre-filter wraps and panels for gas turbine air inlet housings are made with 100% synthetic media and are UL900 class 2 rated. The pre-filter panels are a beverage board design and can be incinerated to reduce disposal costs. These pre-filter panels come in a variety of sizes and MERV ratings. The pre-filter wraps protect the high efficiency filter cartridge ...

CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...

Low NOX burners and Low NOX burner Upgrades are available for both industrial and utility boilers burning a wide variety of fuels and have proven to be a cost effective way to reduce NOX emissions by 40% - 60%. Each system application is specifically designed to maximize NOX reduction without sacrificing combustion performance or unit ...

PCI has several very small to medium sized low NOx catalytic burner products in development. Our gas burner technology was developed under an NSF program with promising results including flameless catalytic combustion of natural gas with CO less than 2 ppm, CH4 less than 2 ppm and NOx less than 0.3 ppm. We have further developed this for use with other gases (such as butane, with which we have ...

The ZEECO® GLSF Enhanced Jet burner is an ultra-low emissions flat flame burner. The above pictures display GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a superior heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific application with ...

R&D Dynamics designs, develops and manufactures a line of high speed, foil air/gas supported turboalternators, ranging in size from less than 5 kW to 400 kW, for a variety of ...

Catalytic heating is a technology that has been gaining popularity in recent years as a more energy-efficient and cost-effective alternative to traditional convection heat. Catalytic heating is a process that uses a catalytic converter to convert natural gas or propane into heat. The converter works by oxidizing the gas, which creates heat that is then distributed throughout the home or building. ...