Cable Infrastructure Equipment Supplied In Asia & Middle East

Pre-molded elbow boots applied for RMU connections with the function of protecting, insulating, and sealing. They are also used to reduce the clearances between phase to phase and phase to ground. Such boots have outstanding behaviors from the weathering resistance and electrical properties. They can withstand normal and surge voltages induced during the operational life of termination systems. ...

Pre-molded elbow boots applied for switchgear and transformer connections with the function of protecting, insulating and sealing. They are also used to reduce the clearances between phase to phase and phase to ground. Such boots have outstanding behaviors from the weathering resistance and electrical properties. They can withstand normal and surge voltages induced during the operational life of ...

TTL series lugs are manufactured from electrolytic Copper tube with a purity greater than 99.9%. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Mingjiang lugs are annealed to guarantee optimum ductility, an absolute necessity for connectors which will have to withstand the severe deformation ...

The Radius Mote uses unlicensed wireless spectrum to seamlessly connect SDI-12 sensors to a central Radius Gateway over long distances-up to 15 km (9.3 miles), and up to 60 km (37 miles) using Radius Repeaters. Radius networks incorporate advanced low power, long range wireless technologies with proprietary mechanical engineering, power management and power supply to eliminate the need ...

Silicone Terminal Protector Boot SITB-01 can be used in the Ring main units having Bushing of C type interface. Modern switchgear where compactness is often achieved through use of Insulating SF6 Gas. Cable Terminal Protector is extremely well suited for this kind of Switchgear. It can accommodate cross section up to 300 ...

Material: E-copper: Finish. ETP Grade Copper: Electro Tinned Plated. ...

Material: E-copper: Finish. ETP Grade Copper: Electro Tinned ...

The Radius Repeater uses unlicensed wireless spectrum to extend the range of a Radius Mote so it can be located up to 15km farther away from a central Radius Gateway. Radius networks incorporate advanced low power, long range wireless technologies with proprietary mechanical engineering, power management and power supply to eliminate the need for expensive supporting infrastructure ...

The Radius Gateway uses unlicensed wireless spectrum to seamlessly connect SDI-12 sensors attached to a Radius Mote over long distances—up to 15 km (9.3 miles), and up to 60 km (31 miles) using Radius Repeaters. The Gateway is the central hub of a Radius network. Radius networks incorporate advanced low power, long range wireless technologies with proprietary mechanical engineering, power ...