High Voltage Testing Equipment Supplied In Asia & Middle East

20ft ISO Construction - MV - Resistive Reactive - 1500kVA – 2750kVA @ 0.8pf - 690V – 24kV - 50/60Hz. The 8800 is a containerized resistive inductive load bank with an integrated transformer for medium and high voltage testing. Available with capacities from 1500kVA - 2750kVA and a choice of voltages and frequencies. Designed in a 20ft containerized construction, the 8800 is perfectly ...

The autonomous combined electronic current and voltage transformer for commercial metering with the possibility of mounting on power transmission poles and substationsxi-TOR-110S is a new innovative device that allows you to organize electricity metering with an accuracy suitable for commercial settlements, directly at the border of the balance sheet belonging to various subjects of the ...

Development and quality protection for electric powered vehicles requires comprehensive tests of each component including areas such as energy storage, traction-inverter and the electric motor. Beside the test of all of these components in combination on an e-motor test bench with a high voltage battery, exclusive testing of the traction inverter (PIM) has high importance. For that, Kratzer ...

IEC 60060-1-2010 High-voltage test techniques - Part 1: General definitions and test ...

K-3980J AC load bank contains many different customized models containing following ...

High current test systems are used to test the thermal stability of equipment and components. The test system induces a current in the test object causing it to heat up. The system can perform the heat cycle testing for power cables type test and pre-qualification test according to IEC 60840, and IEC 62067 etc. Based on pre-qualification test needs, test system is divided into two parts: test ...

HZYDP-30KV High Voltage VLF Hi Pot Tester Technical parameters ain parameters of series products are shown in Table 1 Table 1 Main Technical Parameters of VLFS Series Ultra-low Frequency High-voltage Generator ? Power supply: 220V±10%, ...

AT-D Automatic Surface Tension Meter is designed and made as per the National Standard of People's Republic of China GB/T6541-86 (1991) 'Test Methods for Interfacial Tension of Oil against Water by the Ring ...

MPI High-Power device characterization systems are specifically designed for on-wafer high power device testing. MPI TS150-HP and TS200-HP probe systems provide a complete 150 mm and 200 mm on-wafer solution. They are engineered to achieve low contact resistance measurements of power semiconductor under wide range of ...

Spectroscopy Group: This product is one of the spectroscopy group. The MAC-base consists of a 12-bit CFP multi-channel analyzer and an integrated high voltage generator (0-2000V) and divider to power the photo-multiplier (PMT). It plugs directly onto the PMT and can be powered and controlled via USB. The high voltage divider can deliver 100µA DC current and 20 mA pulse current to the PMT ...

The Raptor-HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC ...

Greenfuel Energy Solutions introduces its latest electric mobility solution, the GF51LFP002 battery. Designed specifically for three-wheelers, this 10kWh Li-ion battery features robust LFP chemistry and is engineered to withstand extreme conditions. It boasts top-of-the-line safety features and thermal management, ensuring optimal performance across various applications. Technical specs include a ...

ETL40 Van Mounted Cable Fault Locating System is the most advanced system in power cable fault detection combining the best-in-market technologies into a single fully automatic centralized setup with high reliability and multi-level safety standards. The system is capable of locating faults on low & high voltage cables and pinpointing cable faults of cables with DC voltage up to 40kV. ETL40 ...

AT CB-300 Circuit Breaker analyser can be used to test and measure the mechanical characteristic parameters of high voltage switch (such as vacuum, six fluoride, less oil). Some key of this offering are stable measurement data, simple operation, has strong anti- interference ability, can be in the 500KV level and below the power station to do experiments, wiring is convenient, and is the most ...

Greenfuel's 2kWh Smart Battery Pack is engineered for electric two-wheelers, providing outstanding performance even under harsh conditions. This battery pack features advanced safety systems, high energy density, and superior thermal engineering. It includes innovative elements such as crash detection, redundant safety mechanisms, heater control, and master/slave adaptability, allowing ...

The Motwane Hi-Pot tester, HVT series offer wide range of test voltages to determine the withstand strength of electrical insulation for the normally occurring over voltage transients. HVT series Sets are available in a wide range of voltage and power ratings with exceptional reliability, durability and functionality which can generate AC, DC or AC+DC Voltages (eliminate the need for two separate ...

In our assembly lines for battery modules, high-quality prismatic, cylindrical and pouch cells are processed using state-of-the-art equipment. The modules are stacked at high speed and connected electrically. The product portfolio includes: Wire bonding, laser bonding, resistance welding and laser welding. Length and width of the stacks can be freely configured. All modules undergo a 100% ...

The 7xx30 series high voltage bench power supply is available with one or two output connectors and LED digital voltage reading to allow for accurate voltage adjustment. It is available with either positive or negative output polarity and 1kV, 2kV, 10kV, 20kV or 30kV maximum output voltage. This bench top power supply suits most laboratory environments and is popular among universities. Common ...

ES series is a handy high voltage power supply with compact and high performance. With its space-saving compactness and lightweight, it is suitable for operation in the lab with limited space. Due to the low ripple and high stability, PMT is one of the suitable applications among many others. User-friendly operation and full protections offer the best match power supply for benchtop experiments ...

The AC test transformer are especially designed for testing high voltage products and components, such as cables, power transformers, gas-insulated switchgears, bushings and arresters. It is also suitable to test insulation materials. They are used to generate testing high voltage and function as part of the complete system. These systems are particularly suited for tests requiring stable voltage ...