Power Distribution Equipment & Supplies In Iraq

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

The Federal Signal UltraVoice Integrated Controller, Model UVIC-B, is a Mass Notification panel designed to deliver clean, clear, amplified audio to a network of speakers (sold separately). The UltraVoice Integrated Controller can be used in a standalone application or networked with an outdoor Mass Notification system. The controller provides high quality broadcast of live or pre-recorded voice ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

The HT15E power unit is driven by a 15HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S4TLP. Other hydraulic tools and equipment may also operate from this power ...

The SAT-1 is a tower light stack with an audible alarm that may be used to indicate various states of operation when connected to OS-4, OS-6, C-30ZX, EE-2, OEM-1, OEM-2, and UV-100. The indicator lights and audible alarm are controlled by relay contact closure. The SAT-1 has interchangeable stacking light modules that may be customized after purchase. The SAT-1 can be mounted on new OS-6 in our ...

The MCM-U08AII-BI module is ideal for measuring bipolar voltages in test systems and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test benches, generators test stands, HIL systems and test benches for ...

The HT20EV power unit is driven by a 20HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3CML, S3VHL and S4T. Other hydraulic tools and equipment may also operate from this power ...

This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...

The Polychem Torque Limiter is an easy-to-reset alternative to traditional shear pin devices. It provides reliable overtorque protection by transmitting torque through balls retained in detents against adjustable spring pressure. When torque exceeds a preset value, the balls leave their seats and roll free to completely disengagem the driving and driven components, preventing costly drive system ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

The HT60EV power unit is driven by a 60HP TEFC electric motor for use where electric power is available. It is designed to drive several of our pump models plus many other hydraulic tools and ...

Compact, efficient, durable source of brilliant daylight quality light. Brighter, whiter light than 150W Halogen units. Color temperature: 6500K. Typical LED life: >50,000 hours. Low power consumption: 52W typical. Electronic (PWM) intensity control from 0-100%. Choice of port (ACMI, Olympus, Storz and Wolf). Accepts 100-240V AC, 50/60 Hz input power for worldwide operation. Regulatory: ...

This popular unit features a Deutz diesel engine and pressure compensated hydraulic pump for maximum versatility and enhanced performance when driving submersible pumps or other hydraulic ...

The MCM-EVA combines several functions in one module: 8-channel multiplexed voltage measurement, 4-channel auxiliary relay for controlling the main relay terminal 15 or similar, 2x 40pin. Mezzanine expansion slots for plugging of customer- or application-specific modules Piggy, Patch ...

Reverse Camera/Monitor Systems, from Federal Signal, provide the driver with an expanded field-of-view for enhanced safety during back-up or while maneuvering the vehicle in challenging environments. With a variety of cameras, monitors, and mounting options available, Reverse Camera/Monitor Systems has a solution for almost any vehicular application. ...