Power Distribution Equipment & Supplies In Suriname

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

Texas Boom offers the Leeagra DOT 500 Diesel Fuel Trailer. This trailer is built to be safe because it’s strong. Offering 500 gallon storage and transport of class 3 combustible materials. With all the features highlighted below, the DOT 500 is in a class by itself to meet your fuel hauling ...

This portable and rugged diesel power pack is ideal for driving our 3" trash pumps and even our 6" high-volume propeller pump. It also can provide hydraulic power to run many other hydraulic tools using the variable speed throttle to control hydraulic ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

The HT30EV power unit is driven by a 30HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S4CSL, S4VHL and S4SHR. Other hydraulic tools and equipment may also operate from this power ...

For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...

The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...

The MCM-EVA combines several functions in one module: 8-channel multiplexed voltage measurement, 4-channel auxiliary relay for controlling the main relay terminal 15 or similar, 2x 40pin. Mezzanine expansion slots for plugging of customer- or application-specific modules Piggy, Patch ...

The HT20EV power unit is driven by a 20HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3CML, S3VHL and S4T. Other hydraulic tools and equipment may also operate from this power ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...

High-resolution Power-R-decade with current and voltage measurement. Remote control via ...

These FEP straight lengths come in 6-foot sizes and possess the same properties as standard FEP. They are a great choice as an electrical insulator in high voltage equipment, sight glass tubes, or machined to short lengths for mechanical ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

For reliable continuous cooling. The essential advantage of our refrigeration units is that the cooling is carried out by means of water outside the transformer. This is to prevent the transformer from being damaged if leaks occur. The cooling systems can be connected to the gas insulated transformer directly and are optimally suited for continuous ...

With the MCM-U16FII module, frequencies, duty cycles and pulse widths can be measured. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use. ...

If you need to count on your backup power supply, you better be testing your fuel and polishing it on a regular basis. Never assume the fuel is good to go and then find out in an emergency that the fuel has a problem. From 400 gallons per hour to over 1200 gallons per hour of portable fuel ...

This compact and rugged diesel power unit features an extended run fuel tank, extra oil cooling and easy handling. Great for continuous duty applications powering our pumps or other hydraulic equipment using the variable speed throttle to control hydraulic ...