Power Distribution Equipment & Supplies In USA

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

A scroll compressor uses two interleaving scrolls to compress air. Devices using this technology are known for operating more smoothly, quietly, and reliably than conventional piston compressors. Unlike pistons, the orbiting scroll’s mass can be perfectly counterbalanced, with simple masses, to minimize vibration. The scroll’s gas processes are also more stable and continuous. ...

The Federal Signal UltraVoice Integrated Controller, Model UVIC-B, is a Mass Notification panel designed to deliver clean, clear, amplified audio to a network of speakers (sold separately). The UltraVoice Integrated Controller can be used in a standalone application or networked with an outdoor Mass Notification system. The controller provides high quality broadcast of live or pre-recorded voice ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

With the MCM-U16FII module, frequencies, duty cycles and pulse widths can be measured. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use. ...

The HT15E power unit is driven by a 15HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S4TLP. Other hydraulic tools and equipment may also operate from this power ...

The digital I/O module has individually configurable inputs and outputs. The outputs can be used as high-side, low-side or push / pull drivers. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is optimally equipped for use in harsh environments. Application areas are, among others, test stands, HIL systems and ...

The HT20EV power unit is driven by a 20HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3CML, S3VHL and S4T. Other hydraulic tools and equipment may also operate from this power ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

Delta-T - Model ES2-05 - Solar Energy Flux Sensor (5m ...

For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...

Compact, efficient, durable source of brilliant daylight quality light. Brighter, whiter light than 150W Halogen units. Color temperature: 6500K. Typical LED life: >50,000 hours. Low power consumption: 52W typical. Electronic (PWM) intensity control from 0-100%. Choice of port (ACMI, Olympus, Storz and Wolf). Accepts 100-240V AC, 50/60 Hz input power for worldwide operation. Regulatory: ...

The MCM-EVA combines several functions in one module: 8-channel multiplexed voltage measurement, 4-channel auxiliary relay for controlling the main relay terminal 15 or similar, 2x 40pin. Mezzanine expansion slots for plugging of customer- or application-specific modules Piggy, Patch ...

Reverse Camera/Monitor Systems, from Federal Signal, provide the driver with an expanded field-of-view for enhanced safety during back-up or while maneuvering the vehicle in challenging environments. With a variety of cameras, monitors, and mounting options available, Reverse Camera/Monitor Systems has a solution for almost any vehicular application. ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

CIT 350 process display with bargraph Features: - input signal: 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V - 4-digit LED display - transducer supply 24 VDC - communication interface RS-485 (Modbus RTU) - front panel housing 96 x 48 mm - 20-segment bargraph Optional Features: - output 2/4 relay / OC - output 4 … 20 mA / 0 … 10 V Functionality: - extended bargraph settings - free scalable display ...

This portable diesel power pack is ideal for driving our 2″ pumps and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

This power unit features a 22 HP Honda OHV gas engine, extended run fuel tank, extra oil cooling and easy handling. It is available with a fixed displacement gear pump or pressure compensated piston pump. Great for continuous duty applications powering our pumps or other hydraulic tools and equipment. Variable speed throttle controls hydraulic ...