Power Distribution Equipment & Supplies In Iowa

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

This portable and rugged diesel power pack is ideal for driving our 3" trash pumps and even our 6" high-volume propeller pump. It also can provide hydraulic power to run many other hydraulic tools using the variable speed throttle to control hydraulic ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...

The HT30EV power unit is driven by a 30HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S4CSL, S4VHL and S4SHR. Other hydraulic tools and equipment may also operate from this power ...

The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...

High-resolution Power-R-decade with current and voltage measurement. Remote control via ...

These FEP straight lengths come in 6-foot sizes and possess the same properties as standard FEP. They are a great choice as an electrical insulator in high voltage equipment, sight glass tubes, or machined to short lengths for mechanical ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

With the MCM-U16FII module, frequencies, duty cycles and pulse widths can be measured. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use. ...

Texas Boom offers the Leeagra DOT 500 Diesel Fuel Trailer. This trailer is built to be safe because it’s strong. Offering 500 gallon storage and transport of class 3 combustible materials. With all the features highlighted below, the DOT 500 is in a class by itself to meet your fuel hauling ...

If you need to count on your backup power supply, you better be testing your fuel and polishing it on a regular basis. Never assume the fuel is good to go and then find out in an emergency that the fuel has a problem. From 400 gallons per hour to over 1200 gallons per hour of portable fuel ...

This compact and rugged diesel power unit features an extended run fuel tank, extra oil cooling and easy handling. Great for continuous duty applications powering our pumps or other hydraulic equipment using the variable speed throttle to control hydraulic ...

The 1600 Series Sewer Vent is cast from 356-T6 aluminum alloy for light weight construction. The valve is then powder coated the a green epoxy that is highly resistant to sewer acids and gases. It is finished with a green coating that blends in nicely with the existing environment. A 1/4" x 1/4" protective mesh screen keeps debris and insects form entering the vent pipe while maintaining the ...

The Sound Attenuated power unit is designed to be used in residential areas and other locations where low sound levels are required. With an efficient Deutz diesel engine this unit meets today’s emission standards and demanding hydraulic power ...

- For the convenient operation of steam boilers up to 4,000 kg/h of steam - Appealing price-performance ratio for steam boilers up to 4,000 kg/h of steam - Colour touch display for easy operation and clear visualisation of operating status - Flexible installation and small space requirement: installed on the boiler at the factory or loose control cabinet for wall mounting - Power electronics for ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...