Power Distribution Equipment Supplied In Denmark

Powerful, efficient and designed for continuous operation: the oil-injected VMX Premium air ends from AERZEN have a proven track record for reliability in tough situations. With 10 power levels, they are sure to become your first choice when it comes to configuring high-quality air ...

Power supply 100...240 Vac (47...63 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. 8Dinconnector for instrument connection. Cable length 2 m. ...

Power supply 100...240 Vac (50...60 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. RJ45 connector for instrument connection Cable length 2 m. ...

AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...

The DERBY 182 is a compact, inverter welding machine for solid and flux-cored electrodes on 5 kg or 1 kg spools. Due to its small size and transport-friendly design, the DERBY 182 is ideal for assembly, bodywork, repair and maintenance work. The DERBY 182 works with all types of wire electrodes: Solid wire for alloyed and unalloyed steels, stainless steel and aluminum alloys. Also flux-cored ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...

7.03.241 Modular RJ-45 Y-cable splitter, power/signal, 30 cm. This cable should be used when connecting the MASS-VIEW to power suppy as well as to a RS-232 ...

DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to sensors and transmitters. Maximum operational safety at small ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

ALVAC 1600 Flex is a vacuum lifting machine with a maximum load capacity of 160 kg. The main post is flexible in four directions and a tilting steering rod is included. Equipped with quick connector for changing suction plates in ...

Ballard's 30kW FCveloCity-MD module was developed for use in zero-emission, battery dominant hybrid, heavy duty motive applications. The hydrogen fuelled power module is sized for smaller transit vehicles, and offers a low risk, versatile and easy installation solution for system integrators, with a design based on many years of transit experience, and backed by Ballard's unmatched expertise and ...

The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...

Advanced Energy’s Artesyn AIF42BAC-01N series full-brick module accepts a wide 90 to 264 VAC input. Rated at 504 W, the module has a high conversion efficiency of 93% typically and provides a nominal isolated output voltage of 12 VDC with a 10 V auxiliary output. Featuring an industry-standard 2.4 x 4.6 in fullbrick form factor and a height of only 0.55 in. This family of modules is ...

Even stronger in a team: Cascaded XRGI® up to 80 kWel. Is your energy demand higher than 20 kWel and does it require an appropriately dimensioned CHP? Things are much smarter with the XRGI®. Its modular design provides for their easy and flexible connection in cascades. Even if the requirements are for high outputs, it still can be mounted in a compact way. XRGI® plants can therefore ...

Bringing new life to aging wind turbines. Wind turbine repowering is all about getting the maximum value from the initial investment. Replacing aging, generally smaller wind turbines and turbine parts with new and more efficient units leads to higher capacity and more efficient turbines, significantly increasing the amount of energy generated from a given wind farm. Power production increases as ...

Avanti has produced ladders since 1885, and for more than 2 decades Avanti Wind Systems has produced ladders in aluminum for the Wind Turbine Industry. With great success – Avanti’s ladders can be found in turbine towers all over the world. The Avanti Ladder is a safe and rigid structure. The design is optimized ensuring strength in the stiles, in the rungs and in the connections ...

Superior strength, ground clearance, and capacity is found in the a-series' largest loaders, the a7236 and the a7545. Norcar a7236 has high specifications already as standard. A four-cylinder diesel engine and dual working hydraulic pumps prepares the machine well for work with tools requiring high hydraulic pressure. Several functions can be used simultaneously without affecting each other, ...

The G3 Inverter/Charger combines a pure sine wave inverter with an intelligent battery charger. When connected to mains, the Inverter/Charger charges batteries automatically. When disconnected, it converts 12 or 24 DC (Direct Current) voltage from the batteries to 230VAC (Alternating Current), ready for ...

The VF-Series has been developed specifically for projects where the ambient and site conditions are harsh. A wide array of materials and motor choices allow for flexible design options to meet specific requirements. The VF industrial series can be constructed with dual heat exchangers up to 12 meters long and a 2.4 meter width. There is also an option for a 2.2 meter wide version for ...