Transformer Monitoring Equipment Supplied In Australasia

The VPInstruments 3 Phase Power Meter is the highly accurate power meter for your permanent power measurements. With the power meter you can measure the voltage and current of all three phases. Get the complete picture as the sensor provides power, voltage, current, cos(phi) and many more electrical parameters. Via the RS485 (Modbus RTU) interface you can connect the 3 Phase Power Meter to any ...

The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...

The LINAX PQ5000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by means of optional ...

ABB offers a full range of dry-type transformers with primary voltages through 72.5 kV in built according to all major standards including IEC and ANSI. To minimize environmental contamination and fire hazard, customers are specifying dry-type transformers more frequently. These transformers meet strict parameters with respect to electrical system demands and functioning in areas with extreme ...

The POWER CONVERTOR goes everywhere with you. Transforming direct current into alternating current, the POWER CONVERTOR is the ideal way to take advantage of the electricity stored in your batteries—all of which are compatible—wherever you happen to be. With the POWER CONVERTOR battery-powered generator at your worksite, you can use it to power electric tools with a wattage lower than ...

Transparent power quality and energy consumption monitoring. The SINEAX AM1000 is a compact instrument for measuring and monitoring in power distribution systems. It excels in display quality and intuitive operation. The devices provide a wide range of functionalities which may even be extended by optional ...

The Switchgear and Cable Monitor (SCM) is a continuous partial discharge (PD) monitor which monitors, stores and correlates equipment operating dynamics of switchgear and cable. The SCM provides information on the health of the medium voltage insulation systems of switch gear cable, bus duct and unit ...

Dynamic Ratings advanced design and precisely implemented transformer monitoring, control and communication solutions provide users with many ...

The CENTRAX CU3000 combines in one housing for panel mounting the functionality of a highly accurate measurement device for power applications with the possibilities of a freely programmable PLC according IEC 61131. Thus, in many cases, there is no need for a separate PLC, a control system, a remote display or an additional data collector. ...

The CENTRAX CU5000 combines in one hat rail housing the functionality of a highly accurate measurement device for power applications with the possibilities of a freely programmable PLC according IEC 61131. Thus, in many cases, there is no need for a separate PLC, a control system, a remote display or an additional data ...

The calibrated, compact energy meters included in our Compact Line product range can be used to acquire and bill active energy in industrial, household, commercial and building management applications. Relevant values are transmitted to data logging, billing and optimizing systems, as well as to building automation and control technology applications, by means of 2 pulse outputs or the integrated ...

Dewesoft power analyzer features a high-sampling rate, high-bandwidth, and high-accuracy hardware for power analysis on electric motors, inverters, transformers, switches and any other electronic equipment. The ability to connect other sensors for temperature, vibration, RPM, torque offers a unique solution for modern power analysis ...

Transparent power quality and energy consumption monitoring. The SINEAX AM3000 is a compact instrument for measuring and monitoring in power distribution systems. It excels in display quality and intuitive operation. The devices provide a wide range of functionalities which may even be extended by optional ...

The wide range of ratings with short circuit current from 80 to 130 kA and rated current of up to 23,000 A makes HECS the most used GCB in the world for generators up to 800 MW. The complete range of HECS is naturally cooled and its reliability is proven by over 2,000 installations worldwide since 2003. It has the lowest lifecycle cost with up to 20,000 CO no-load operations or 20 years between ...

HEC 9 has been developed as a system for large sized power plant such as nuclear, coal fired and hydro power plants. It has the world's highest performance with short-circuit currents up to 300 kA and it is also highly suitable for retrofits or replacements of old GCBs in air-blast technology. ...

The SINEAX DM5000 is a compact instrument to measure and monitor in heavy current grids. It provides a wide range of functionalities which may even be extended by optional components. The connection of the process environment may be performed by communication interfaces, via digital I/Os, analog outputs or relays. The device may be completely adapted to the requirements on site either via ...

The LINAX PQ3000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. It stands out by the display quality and intuitive ...