Voltage Management Equipment & Supplies In Latin America

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 0.950 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Smallest cell ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

The MCM-U08AII-BI module is ideal for measuring bipolar voltages in test systems and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test benches, generators test stands, HIL systems and test benches for ...

Cell scanning: Single Cell SC (1C). Contact design: 2mm MultiLam. Contact bearing: In housing body, floating. Interlocking type: Positive Lock in plastic body. Contact pitch min.: 2.000 mm. Pinhole/ Geometry: Rectangle 2x2 mm. Bipolar plate material: Graphite. Connection type: Wired Benefit (USP): Commercial contact with very good availability. Robust design. Application: Series application, ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

Cell sensing: Single Cell SC (1C). Contact design: 0.5 mm spring wire with 1/2 A-shape. Contact bearing: In PCB on one side with redundant contact pin. Locking type: Vertical-Pressure-Lock. Contact pitch min.: 2.350 mm. Pinhole/ Geometry: Pinslot V-shaped, 0.8 mm depth. Bipolar plate material: Graphite. Connection type: Flexcard. Benefits (USP): Direct mechanical and electrical connection to the ...

Reverse Camera/Monitor Systems, from Federal Signal, provide the driver with an expanded field-of-view for enhanced safety during back-up or while maneuvering the vehicle in challenging environments. With a variety of cameras, monitors, and mounting options available, Reverse Camera/Monitor Systems has a solution for almost any vehicular application. ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

In addition to standard test signal cables, we also offer customised high-voltage wiring harnesses and adapter cables for your project. All wiring harnesses are manufactured in top automotive quality in our wiring harness factory in ...

Power supply 100...240 Vac (47...63 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. 8Dinconnector for instrument connection. Cable length 2 m. ...

With the MCM-U08AOS eight voltages can be generated. Depending on the application may be between three output voltage ranges can be selected. The MCM-U08AOS is ideal for generating voltages with limited output currents in testing systems and test systems. Can be simulated with the module thus a wide range of analogue sensors in a simple manner. ...

Cell scanning: Mixed: 29x SC (1C), 100x TC (3C). Contact design: 0.4 mm spring wire with 1/2 A-shape. Contact bearing: In PCB one-sided with redundant contact pin. Interlocking type: Vertical-pressure-lock. Contact pitch min.: 1.715 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Graphite. Connection typ: Flexcard. Benefit (USP): Modular positioning and locking ...

The process modules add numerous functions to the CVM systems from SMART TESTSOLUTIONS. They offer synchronous data rates of up to 400 x 1 kHz per channel via the LVDS bus, a high-speed connection to the PD via Ethernet and bus interfaces (EtherCAT, CAN, ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

Cell scanning: Single Cell SC (1C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing. In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole. Contact pitch min.: 1.015 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Wired solution allows CVP connection even at ...

The MCM-U08 AII module is ideal for measuring unipolar voltages in test benches and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, generators test stands, HIL systems and test benches for ...

Power supply 100...240 Vac (50...60 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. RJ45 connector for instrument connection Cable length 2 m. ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...