Browse all Channels
Advanced Energy Industries, Inc.

Advanced Energy Industries, Inc.
1595 Wynkoop Street, Suite 800 ,
Denver ,
CO 80202
USA
  2. Companies
  3. Advanced Energy Industries, Inc.
  4. Products
  5. Advanced Energy - Model E2T Quasar ...
Advanced Energy - Model E2T Quasar M8100 - Continuous Flare, Pilot, and Flare Monitoring Detection Instruments

- Model E2T Quasar M8100 - Continuous Flare, Pilot, and Flare Monitoring Detection Instruments

From

0

Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from housing.

Overview

The E2T Quasar M8100 is available in three models.The M8100SM provides continuous monitoring of flare stack smoke levels, the M8100PM enables continuous duty monitoring of pilot flames on flare stacks, and the M8100FM monitors flared gases.

The Quasar M8100 Series utilizes multi-wavelength infrared detection and electronic circuitry to automatically compensate for signal variation due to rain, snow or fog. Observed flaring is reported via a 4 and 20 mA signal.

The instrument can be mounted on a control center roof and sighted to monitor flaring on distant flare stacks. It is available with a sturdy mounting system designed to resist movement in high winds and provide vernier sighting capabilities for easy target acquisition at long sighting distances.

Benefits

  • Install a reliable and accurate flare pilot monitoring system without service interruption
  • Use the high-resolution optical system and various spot sizes to position the system up to 1/4 mile (400 m) away from the monitored flare stack
  • Minimize weather impacts with automatic gain control
  • Increase safety and environmental protection

Features

  • Custom electronics adapt to target movement, varying luminosity, and most climate conditions
  • Five optics options to ensure the highest flame signal detection
  • Status lights: green and red
  • Heavy duty swivel mount included for easy mounting, alignment, and target focusing

Technical Specifications

Performance

  • Working Distance: 0 to 1320 feet (400 m)
  • Flame Type: Multi-wavelength infrared monitor sensitive to all flame including Hydrogen
  • Field of View: Available in 37.5:1, 60:1, 75:1, 150:1 & 300:1
  • Output Signal: 4 or 20 mA switched output (4 mA = flame and 20 mA = no flame)
  • Alarm Setpoint: Mechanical relay
  • Response Time: 10 mS
  • Alarm Output Delay: 2 s to 2 min (standard)
  • Sensitivity Adjustment: Automatic climate compensation and manual gain for easy system setup

Electrical

  • Power Requirements: Available in 115 VAC or 230 VAC or 24 VDC (Voltages ±10%) 115 Watts

Physical Characteristics

  • Dimensions: 27 x 32 x 22 cm (10.5 x 12.5 x 8.5 in)
  • Weight: 22 kg (48 lb)
  • Status Lights: Green and red
  • Mounting: M-3 heavy duty 360° swivel mount

Environmental Specifications:

  • Ambient Temperature Limits: -40 to 60°C (-40 to 140°F) with no cooling and using internal heater
  • If the equipment is used at the ambient temperature above 60°C, before turning on the equipment, the cooling system shall be verified that the ambient
  • temperature does not rise above 60°C
  • Explosion-Proof Certification: CSA/US: Class 1, Division 1, Groups C and D Class 1, Division 2, Groups A through D, T4 CENELEC: EEx d MB T4
  • Environmental Protection: Type 4X

Applications

  • Elevated flares - e.g. steam assisted, air assisted, and gas assisted
  • Ground flares - e.g. burn pit flares and multi-point/staged multi-point flares
  • Off-shore flares

Customer reviews

No reviews were found for Advanced Energy - Model E2T Quasar M8100 - Continuous Flare, Pilot, and Flare Monitoring Detection Instruments. Be the first to review!