Aerocompact + - Ballasted Flat Roof System
From Racking - Flat Roof
Our Aerocompact + (east-west oriented), is the aerodynamic solution for mounting framed modules on flat roofs. This system offers best value for your money and has excellent installation features. With Aerocompact + an assembly time of 5 minutes per kWp can be reached. The system is wind-tunnel tested, conforms to UL 2703 and is delivered fully pre-assembled with protective matting with a barrier to prevent diffusion of the plastic softener. You will also receive a free analysis tool for the design of the flat roof for accurate ballasting. Aerocompact + is the fastest and least expensive mounting system that is available on the current market. Designed and assembled by SST Solar USA Inc. AEROCOMPACT + provides an elegant and space-efficient racking solution for flat roofs. This solution will allow you to maximize the solar potential of your flat roof while minimizing the amount of ballast required.
-
Most popular related searches
Advantages
- Best price value available
- The fastest installation in the industry (1 kWp/5 min., 2 men)
- Statically optimized system
- less material = less shipping costs
- Completely pre-assembled
- Incl. protection pads with aluminum sheet
- Optimized wind suction, therefore less ballasting than other systems
- Optimum water drainage
- Suitable for roof edge zones
- Complimentary software for module layouts
- ETL certified, conforms to UL 2703
- Wind tunnel tested for up to 150 mph
- Patent pending
- Without roof penetration
- Optimum module ventilation
Technical Data
- Elevation angle: 10°
- Orientation: east-west
- Avarage additional load of 3,1 lbs per sqf incl. module
- Minimum construction size: four modules
- Edge distances: installation areas of F and G can be used (please use software tool)
- Dimensions for framed modules are (37.4-40.1) inch x (64.1 -66) inch
- With 44 Ips per sqf, snowload downforce on roof equals 0,12N/mm2
- Maxium permitted roof slope 4°
- Maximum roof height 60 ft
- Up to wind load zone 4
- Snowload for Aerocompact+ Alpine is 5,4 KN/m2, for Aerocompact+ Standard 2,4 KN/m2
- Proof of static load capacity of the roof is to be provided by customer
Customer reviews
No reviews were found for Aerocompact + - Ballasted Flat Roof System. Be the first to review!