Agritape - Heat Mat Systems
From Agritape Heat Mat Systems
Agritape Heat Mat Systems are easily installed and removed, so bench space can be used for multiple purposes. The Agritape heats up when it is electrified with standard house current (110 volts AC) and generates heat (up to 95° F) that is extremely uniform across the entire surface of the tape. The tape is rated 20 watts per linear foot. Agritape Heat Mats distribute heat evenly over the entire mat surface, eliminating the cool spots typical of wire coil mats.
-
Most popular related searches
Products Details
Agritape Heat Mats:
- Provide supplemental bottom heat for maximum germination.
- Raise soil temperature up to 20° F over ambient air temperature.
- Mats can be custom made up to 25' length depending on width.
- Available in widths of 11', 22' and 44'.
To install a system, roll out the heat mat and plug into the control unit. Cover the heater with the ground screen. Connect the ground wire from the control unit to the screen. Place seed tray or container on ground screen. Plug in the control unit, then place the bulb thermostat in the soil of the seed tray or container. Set the dial on the thermostat to the desired soil temperature. Insulation board may be installed under the heater to improve thermal efficiency but is not necessary. Ambient temperature should be kept at 50° F or higher, as the Agritape will increase soil temperature by a maximum of 20° F.
Agritape Heat Mats: We stock 11' wide Agritape heaters in standard lengths of 4', 10', and 25'. Custom lengths can be ordered in any length up to 25'.
The 22' wide material is stocked in standard lengths of 4', 8', and 10', while the 44' wide material is stocked in standard lengths of 6', 8', and 10'.
Customer reviews
No reviews were found for Agritape - Heat Mat Systems. Be the first to review!